Brand: SELECLINE
Category: Washer
Manual Type:
Language:
Brand: SELECLINE
Category: Washer
Manual Type:
Language:
Uploaded: April 8, 2025, 1:51 p.m.
Warranty Summary
Description | Reason | Solution |
---|---|---|
Washing machine does not start | Door is not closed properly | Restart after the door is closed Check if the clothes are stuck |
Door cannot be opened | Safety protection is enabled | Disconnect the power, then restart |
Water leakage | Connection between inlet pipe or outlet hose is not tight | Check and fasten water pipes Clean outlet hose |
Detergent residue in the detergent dispenser | Detergent is damp or clumped together | Clean the detergent dispenser |
Indicator or display does not light up | CPU or harness is disconnected | Check for power failure and properly connected plug |
Abnormal noise | – | Check if the fixing bolts have been removed Check for level floor |
Pause/Start | Door is not closed properly | Restart after the door is closed Check if the clothes are stuck |
No Spin | Water inlet problem while washing | Check if the water pressure is too low Straighten the water pipe Check if the inlet valve filter is blocked |
Pause/Start & No Spin | Draining takes too long | Check if the drain hose is blocked |
Extra Rinse | Water overflow | Restart washing machine |
Other | If the problem cannot be solved, call customer service |
Description | Reason | Solution |
---|---|---|
Washing machine does not start | Door is not closed properly | Restart after the door is closed Check if the clothes are stuck |
Door cannot be opened | Safety protection is enabled | Disconnect the power, then restart |
Water leakage | Connection between inlet pipe or outlet hose is not tight | Check and fasten water pipes Clean outlet hose |
Detergent residue in the detergent dispenser | Detergent is damp or clumped together | Clean the detergent dispenser |
Indicator or display does not light up | CPU or harness is disconnected | Check for power failure and properly connected plug |
Abnormal noise | – | Check if the fixing bolts have been removed Check for level floor |
Pause/Start | Door is not closed properly | Restart after the door is closed Check if the clothes are stuck |
No Spin | Water inlet problem while washing | Check if the water pressure is too low Straighten the water pipe Check if the inlet valve filter is blocked |
Pause/Start & No Spin | Draining takes too long | Check if the drain hose is blocked |
Extra Rinse | Water overflow | Restart washing machine |
Other | If the problem cannot be solved, call customer service |