Brand: Safety 1st
Category: Car Seat
Manual Type:
Language:
Manual for Grow and Go - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:42 p.m.
Manual Publish Date: 2019-05-10
Warranty Summary
Dorel Juvenile Group (DJG) warrants this product against defective materials or workmanship for one year from the original purchase date.
The Safety 1st Grow and Go car seat is a 3-in-1 system adapting to your child's growth. It starts as a rear-facing seat for infants (5-40 lbs), converts to a forward-facing harness seat for toddlers (22-65 lbs), and finally becomes a booster seat for older children (40-100 lbs). Key operations include adjusting the harness and headrest height as your child grows, selecting the appropriate car seat mode based on weight and height, and securely installing the seat in your vehicle using either LATCH system or vehicle belts. Always ensure a snug harness fit and follow vehicle-specific instructions for proper installation.
Troubleshooting and error codes
| Problem: Car seat buckle or harness release lever sticks, straps not tight enough. | Solution: Do not lubricate. Check for obstructions like food, drinks, or dirt. Clean with warm water or tweezers. If unresolved, do not use the car seat. |
| Problem: Harness twists. | Solution: Straighten harness each use to prevent twisting. Lock buckle and tighten harness. |
Troubleshooting and error codes
| Problem: Car seat buckle or harness release lever sticks, straps not tight enough. | Solution: Do not lubricate. Check for obstructions like food, drinks, or dirt. Clean with warm water or tweezers. If unresolved, do not use the car seat. |
| Problem: Harness twists. | Solution: Straighten harness each use to prevent twisting. Lock buckle and tighten harness. |