Brand: PRO-FORM
Category: Treadmill
Manual Type:
Language:
Manual for XP TRAINER 580 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:45 p.m.
Warranty Summary
The Proform XP Trainer 580 has a 90-day full warranty for defects in material or workmanship, with specific motor warranties of 90 days for incline motor and 25 years for drive motor, for non-commercial use.
To operate the Proform XP Trainer 580 Treadmill, first plug in the power cord and ensure the circuit breaker is reset. Insert the key into the console to turn on the display. For manual mode, simply press 'Go' or speed buttons to start and adjust speed and incline as needed using console buttons. Preset workouts can be selected via workout category buttons. Monitor your progress on the console displays which show time, distance, speed, incline and calories. Heart rate can be measured by holding handgrip sensors. Always start and stop on the side rails, use safety clip and read all precautions before use.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| The power does not turn on | a. Ensure power cord is plugged into a surge suppressor and grounded outlet. b. Verify key is inserted in the console. c. Check and reset the circuit breaker if tripped. |
| The power turns off during use | a. Check and reset the circuit breaker if tripped. b. Ensure power cord is securely plugged in. c. Reinsert the key into the console. |
| The console displays remain lit when you remove the key | a. The console is in demo mode. Hold down the Stop button to turn off demo mode, or see information mode instructions. |
| The displays of the console do not function properly | a. Unplug the power cord and check and reconnect console wiring in the belly pan. |
| The incline of the treadmill does not change correctly | a. Recalibrate the incline system by pressing incline button, removing and re-inserting key while incline is changing. |
| The walking belt slows when walked on | a. Use a single-outlet surge suppressor. b. Adjust rear roller bolts to tighten walking belt if overtightened. c. See back cover of manual if issue persists. |
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| The power does not turn on | a. Ensure power cord is plugged into a surge suppressor and grounded outlet. b. Verify key is inserted in the console. c. Check and reset the circuit breaker if tripped. |
| The power turns off during use | a. Check and reset the circuit breaker if tripped. b. Ensure power cord is securely plugged in. c. Reinsert the key into the console. |
| The console displays remain lit when you remove the key | a. The console is in demo mode. Hold down the Stop button to turn off demo mode, or see information mode instructions. |
| The displays of the console do not function properly | a. Unplug the power cord and check and reconnect console wiring in the belly pan. |
| The incline of the treadmill does not change correctly | a. Recalibrate the incline system by pressing incline button, removing and re-inserting key while incline is changing. |
| The walking belt slows when walked on | a. Use a single-outlet surge suppressor. b. Adjust rear roller bolts to tighten walking belt if overtightened. c. See back cover of manual if issue persists. |