Manual for PFTL27721.0 - Troubleshooting and error codes + PDF Download

Manual for PFTL27721.0 - Troubleshooting and error codes + PDF Download

Brand: PRO-FORM

Category: Treadmill

Manual Type:

Language:

Uploaded: April 7, 2025, 8:13 p.m.

Manual Publish Date: 2021-01-01

Warranty Summary

PRO-FORM warrants this product to be free from defects for 90 days on parts and labor, and 1 year on the frame, under normal use.
Download Manual

To start the treadmill:

  1. Plug in the power cord and ensure the power switch is in the reset position.
  2. Attach the clip of the safety key to your clothing and insert the key into the console.
  3. Stand on the foot rails.
  4. Press the Start button or a numbered speed button to begin.

Speed Adjustment:

  • Use the Speed increase/decrease buttons to adjust speed in small increments.
  • Use numbered buttons for quick speed selection.

To stop the treadmill:

  • Press the Stop button.
  • In emergencies, pull out the safety key.

Troubleshooting and error codes

Problem Solution
Power does not turn on
  • Ensure power cord is plugged into a surge suppressor and grounded outlet.
  • Verify the safety key is inserted in the console.
  • Check if the power switch has tripped; reset if necessary.
  • Console may require activation.
Power turns off during use
  • Check if the power switch has tripped; reset if necessary.
  • Ensure power cord is securely plugged in.
  • Reinsert the safety key.
  • If issue persists, consult the manual's front cover.
Console displays remain lit after key removal
  • Demo mode may be activated. Hold down the Stop button to turn off demo mode. If still lit, see settings mode instructions in manual.
Walking belt slows when walked on
  • Use a surge suppressor meeting specifications.
  • Walking belt may be overtightened; loosen idler roller screws by 1/4 turn each.
Walking belt is off-center or slips
  • Unplug, remove key. Adjust left idler roller screw to center belt.
  • If slipping, tighten both idler roller screws by 1/4 turn each.

Troubleshooting and error codes

Problem Solution
Power does not turn on
  • Ensure power cord is plugged into a surge suppressor and grounded outlet.
  • Verify the safety key is inserted in the console.
  • Check if the power switch has tripped; reset if necessary.
  • Console may require activation.
Power turns off during use
  • Check if the power switch has tripped; reset if necessary.
  • Ensure power cord is securely plugged in.
  • Reinsert the safety key.
  • If issue persists, consult the manual's front cover.
Console displays remain lit after key removal
  • Demo mode may be activated. Hold down the Stop button to turn off demo mode. If still lit, see settings mode instructions in manual.
Walking belt slows when walked on
  • Use a surge suppressor meeting specifications.
  • Walking belt may be overtightened; loosen idler roller screws by 1/4 turn each.
Walking belt is off-center or slips
  • Unplug, remove key. Adjust left idler roller screw to center belt.
  • If slipping, tighten both idler roller screws by 1/4 turn each.