Manual for PV-11

Programming your Remote:

1. Turn on TV manually.
2. Press and hold SET-UP until LED blinks and stays on, then release.
3. Enter 3-digit code from code table. Indicator light turns off when done.
4. If LED blinks rapidly, code is invalid. Recheck code list.
5. If volume/channel don't work, try another code.
6. Enter your code for future reference.

Code Search Programming:

1. Turn on TV.
2. Press and hold SET-UP until LED blinks and stays on, then release.
3. Press CH+ repeatedly (60+ times) until channel changes. LED blinks then stays lit.
4. Use CH- to go backward. CH+ changes direction forward.
5. Press ENTER to lock code.