Manual for A96UH2E & 96G2UHE - Troubleshooting and error codes + PDF Download

Manual for A96UH2E & 96G2UHE - Troubleshooting and error codes + PDF Download

Brand: LENNOX

Category: HVAC

Manual Type:

Language:

Uploaded: March 30, 2025, 4:25 p.m.

Warranty Summary

None

Start-Up Summary:

  • Safety First: Read all safety warnings before operating.
  • Smell for Gas: Check for gas leaks around the furnace area, especially near the floor.
  • Gas Valve Operation: Ensure you understand how to operate the gas control switch lever by hand only, without tools.
  • Automatic Ignition: This furnace uses automatic hot surface ignition. Do not manually light burners.
  • Thermostat Setting: Set the thermostat to the lowest setting initially.
  • Power On: Turn on electrical power to the unit.
  • Gas Valve Switch: Turn the gas valve switch to the ON position after waiting five minutes for gas to clear if smelled previously.
  • Set Thermostat: Set the thermostat to the desired temperature.

Troubleshooting and error codes

Failure to Operate Checklist:

Problem Possible Cause
Unit fails to operate Is the thermostat calling for heat?
Unit fails to operate Are access panels securely in place?
Unit fails to operate Is the main disconnect switch closed?
Unit fails to operate Is there a blown fuse or tripped breaker?
Unit fails to operate Is the filter dirty or plugged?
Unit fails to operate Is gas turned on at the meter?
Unit fails to operate Is the manual main shut-off valve open?
Unit fails to operate Is the internal manual shut-off valve open?
Unit fails to operate Is the unit ignition system in lockout?

Troubleshooting and error codes

Failure to Operate Checklist:

Problem Possible Cause
Unit fails to operate Is the thermostat calling for heat?
Unit fails to operate Are access panels securely in place?
Unit fails to operate Is the main disconnect switch closed?
Unit fails to operate Is there a blown fuse or tripped breaker?
Unit fails to operate Is the filter dirty or plugged?
Unit fails to operate Is gas turned on at the meter?
Unit fails to operate Is the manual main shut-off valve open?
Unit fails to operate Is the internal manual shut-off valve open?
Unit fails to operate Is the unit ignition system in lockout?