Manual for 5502M

Brand: King Pellet Stove

Category: Pellet Stove

Manual Type: User Manual

Language: English

Uploaded: March 7, 2025, 6:19 p.m.

Warranty Summary

United States Stove Company provides a limited warranty against premature failure of components for up to three years, covering defects in workmanship, quality, or materials.
Download Manual

Starting the Stove:

  • Ensure proper venting and electrical connections.
  • Fill hopper with wood pellets.
  • Close hopper lid and viewing door securely.
  • Press the 'ON' button and set desired heat setting.
  • Stove will automatically ignite in 5 minutes.

Operation:

  • Adjust heat range and blower speed as needed.
  • Refuel when hopper is low, using hand protection.
  • For shutdown, press the 'OFF' button.

Maintenance:

  • Regularly clean burnpot, ash, and exhaust system.
  • Inspect and clean chimney annually.

Troubleshooting and error codes

Error Code Error Description Possible Causes
Err1 The high limit temperature sensor has tripped.
  • Inadequate ventilation.
  • Room fan failure.
  • Exhaust Blockage.
  • Electrical Open in wiring.
Err2 Stove ran out of fuel during normal operation.
  • Hopper Empty.
  • Auger output failure or jam.
  • Flame of fuel quality caused fire to burn too slowly or go out.
  • Electrical Open in wiring.
Err3 The stove was unable to reach the Room Fan On temperature within the start-up time.
  • Flame or Fuel quality caused the fire to burn too slowly or go out.
  • Auger output failure or jam Hopper empty on start-up.
  • Electrical Open in wiring.
Err4 The power failed while the stove was hot, and when power was restored, the fire was out.
  • Power loss
Err5 The Auger output fuse has blown.
  • Auger motor jammed or bad.
Err6 The Ignitor output fuse has blown.
  • Ignitor shorted out or bad.
Err7 The Draft Fan (Exhaust Fan) output fuse has blown.
  • Draft Fan motor jammed or bad.
Err8 The Room Fan output fuse has blown.
  • Room fan motor jammed or bad.

Troubleshooting and error codes

Error Code Error Description Possible Causes
Err1 The high limit temperature sensor has tripped.
  • Inadequate ventilation.
  • Room fan failure.
  • Exhaust Blockage.
  • Electrical Open in wiring.
Err2 Stove ran out of fuel during normal operation.
  • Hopper Empty.
  • Auger output failure or jam.
  • Flame of fuel quality caused fire to burn too slowly or go out.
  • Electrical Open in wiring.
Err3 The stove was unable to reach the Room Fan On temperature within the start-up time.
  • Flame or Fuel quality caused the fire to burn too slowly or go out.
  • Auger output failure or jam Hopper empty on start-up.
  • Electrical Open in wiring.
Err4 The power failed while the stove was hot, and when power was restored, the fire was out.
  • Power loss
Err5 The Auger output fuse has blown.
  • Auger motor jammed or bad.
Err6 The Ignitor output fuse has blown.
  • Ignitor shorted out or bad.
Err7 The Draft Fan (Exhaust Fan) output fuse has blown.
  • Draft Fan motor jammed or bad.
Err8 The Room Fan output fuse has blown.
  • Room fan motor jammed or bad.