Brand: KEURIG
Category: Coffee Maker
Manual Type:
Language:
Manual for K-CUP K10 MINI PLUS - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:58 p.m.
Manual Publish Date: 2013-09-06
Warranty Summary
KEURIG warrants the brewer to be free of defects in materials or workmanship under normal home use for one year from the date of purchase.
Initial Setup & Operation Summary:
- Plug the power cord into a grounded outlet.
- Press the power button.
- Lift the cold water reservoir lid and fill with desired amount of water (6, 8, or 10 oz).
- Lower the lid and lift the handle.
- Place a mug on the drip tray. For taller mugs, remove the drip tray assembly.
- Insert a K-Cup pack into the K-Cup Pack Holder.
- Lower the handle completely.
- Press the BREW button.
- Wait for brewing to complete and enjoy your beverage.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Brewer does not have power | Make sure the Power Button has been pressed. Check if the brewer is idle for more than 90 seconds and restart. Ensure brewer is plugged into an independent and secure outlet. Reset circuit breaker if needed. Contact Customer Service if issue persists. |
| BREW Button flashes red too long | If the BREW Button flashes red for longer than 3 minutes, contact Customer Service. |
| Add Water Indicator does not flash blue | Ensure brewer has power. Lift handle to drain water, power off and drain water by holding BREW button. If light still doesn't flash, contact Customer Service. |
| Brewer will not brew | Ensure brewer has power. Avoid reverse osmosis or distilled water. Press Power Button, add water and try brewing. Reset brewer by lifting and lowering handle. Check minimum water level (6 oz). |
| Brewer will not brew when used for the first time | Brewer may be cold or frozen, allow to rest at room temperature for at least 2 hours. Ensure brewer has power. |
| Brewer only brews a partial brew | Allow enough time for water to drain into brewer. Clean Exit Needle and K-Cup Pack Assembly. Descale brewer if necessary. Contact Customer Service if problem persists after descaling twice. |
| Brewer shuts off automatically | Brewer shuts off after 90 seconds of inactivity, press Power Button to restart. If shut off during brew (not power outage), contact Customer Service. |
| There is water in the Drip Tray | Liquid overflow from cup or Cold Water Reservoir is collected in Drip Tray. |
| Red Indicator appears in Drip Tray | Drip Tray is almost full, empty Drip Tray. |
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Brewer does not have power | Make sure the Power Button has been pressed. Check if the brewer is idle for more than 90 seconds and restart. Ensure brewer is plugged into an independent and secure outlet. Reset circuit breaker if needed. Contact Customer Service if issue persists. |
| BREW Button flashes red too long | If the BREW Button flashes red for longer than 3 minutes, contact Customer Service. |
| Add Water Indicator does not flash blue | Ensure brewer has power. Lift handle to drain water, power off and drain water by holding BREW button. If light still doesn't flash, contact Customer Service. |
| Brewer will not brew | Ensure brewer has power. Avoid reverse osmosis or distilled water. Press Power Button, add water and try brewing. Reset brewer by lifting and lowering handle. Check minimum water level (6 oz). |
| Brewer will not brew when used for the first time | Brewer may be cold or frozen, allow to rest at room temperature for at least 2 hours. Ensure brewer has power. |
| Brewer only brews a partial brew | Allow enough time for water to drain into brewer. Clean Exit Needle and K-Cup Pack Assembly. Descale brewer if necessary. Contact Customer Service if problem persists after descaling twice. |
| Brewer shuts off automatically | Brewer shuts off after 90 seconds of inactivity, press Power Button to restart. If shut off during brew (not power outage), contact Customer Service. |
| There is water in the Drip Tray | Liquid overflow from cup or Cold Water Reservoir is collected in Drip Tray. |
| Red Indicator appears in Drip Tray | Drip Tray is almost full, empty Drip Tray. |