Manual for SIMPLE SWAY - Troubleshooting and error codes + PDF Download

Manual for SIMPLE SWAY - Troubleshooting and error codes + PDF Download

Brand: GRACO

Category: Baby Swing

Manual Type:

Language:

Uploaded: April 8, 2025, 1:45 p.m.

Warranty Summary

No warranty information found in this manual.
Download Manual

Starting the Swing

  1. Turn the speed dial clockwise to select a speed (1-6).
  2. Lightly push the swing to start motion.
  3. Adjust speed as needed by turning the dial clockwise (faster) or counter-clockwise (slower).

Using Vibration (if applicable)

  1. Locate the vibration module under the seat.
  2. Turn the vibration switch to one of the two settings to activate.

Stopping the Swing

  1. Turn the speed dial counter-clockwise until it clicks into the "OFF" position.

Troubleshooting and error codes

Problem Possible Cause
SWING WON'T OPERATE
  1. No batteries in swing.
  2. Batteries dead.
  3. Speed setting too low.
  4. Batteries in backwards.
  5. Corrosion on battery terminals.
  6. Baby grabbing swing legs. (Discontinue use.)
  7. Push swing to start.
SEAT DOESN'T SWING VERY HIGH
  1. Control setting too low.
  2. Blanket hanging down, causing increased wind resistance.
  3. Batteries too weak.
  4. Baby too heavy or too active. (Discontinue use.)
  5. Soft carpet (swings higher on hard floors).

Troubleshooting and error codes

Problem Possible Cause
SWING WON'T OPERATE
  1. No batteries in swing.
  2. Batteries dead.
  3. Speed setting too low.
  4. Batteries in backwards.
  5. Corrosion on battery terminals.
  6. Baby grabbing swing legs. (Discontinue use.)
  7. Push swing to start.
SEAT DOESN'T SWING VERY HIGH
  1. Control setting too low.
  2. Blanket hanging down, causing increased wind resistance.
  3. Batteries too weak.
  4. Baby too heavy or too active. (Discontinue use.)
  5. Soft carpet (swings higher on hard floors).