Brand: CVS Health
Category: blood pressure monitor
Manual Type:
Language:
Manual for BP3MY1-2ECVS - Troubleshooting and error codes + PDF Download
Uploaded: March 30, 2025, 4:12 p.m.
Warranty Summary
The CVS Health Advanced Wrist Blood Pressure Monitor is warrantied for the estimated life of the monitor against manufacturer defects.
- Prepare for Measurement: Sit relaxed for 5 minutes before measurement. Avoid eating, smoking and exertion.
- Apply Cuff: Place cuff on wrist, 1/2 inch from hand, with monitor face inside wrist. Secure snugly.
- Start Measurement: Press POWER. Cuff inflates, measurement starts automatically.
- View Results: Systolic, diastolic pressure and pulse are displayed after measurement.
- Stop Measurement: Press POWER button anytime to stop.
Troubleshooting and error codes
| Error No. | Possible cause(s) | Remedy |
|---|---|---|
| ERR 1 | No pulse was detected.* | Ensure the cuff is properly placed on the inside of your wrist and repeat a measurement. |
| ERR 2 | Unnatural pressure impulses influenced the measurement result. | Reason: The arm was moved during the measurement (artefact). Repeat, keeping still and quiet. |
| ERR 3 | Inflation of the cuff takes too long. | The cuff is not correctly seated. Re-position cuff and repeat the measurement. |
| ERR 5 | The measured readings indicated an unacceptable difference between systolic and diastolic pressures. | Take another reading following directions carefully. Contact your doctor if you continue to get unusual readings. |
| HI | The cuff pressure is too high. | Relax for 5 minutes and repeat the measurement.* |
| LO | The pulse is too low (less than 40). | Repeat the measurement.* |
Troubleshooting and error codes
| Error No. | Possible cause(s) | Remedy |
|---|---|---|
| ERR 1 | No pulse was detected.* | Ensure the cuff is properly placed on the inside of your wrist and repeat a measurement. |
| ERR 2 | Unnatural pressure impulses influenced the measurement result. | Reason: The arm was moved during the measurement (artefact). Repeat, keeping still and quiet. |
| ERR 3 | Inflation of the cuff takes too long. | The cuff is not correctly seated. Re-position cuff and repeat the measurement. |
| ERR 5 | The measured readings indicated an unacceptable difference between systolic and diastolic pressures. | Take another reading following directions carefully. Contact your doctor if you continue to get unusual readings. |
| HI | The cuff pressure is too high. | Relax for 5 minutes and repeat the measurement.* |
| LO | The pulse is too low (less than 40). | Repeat the measurement.* |