Name: Manual for SS-700 - Troubleshooting and error codes + PDF Download
Brand: Cuisinart

Manual for SS-700 - Troubleshooting and error codes + PDF Download

Brand: Cuisinart

Category: Coffee Maker

Manual Type:

Language:

Uploaded: April 8, 2025, 1:45 p.m.

Manual Publish Date: 2010-04-12

Warranty Summary

Cuisinart® SS-700 is warranted to be free of defects for 3 years from the original purchase date under normal home use.

Set-Up & First Brew:

Unwrap cord and plug into grounded outlet.
Remove all packing materials.
Place a mug on the drip tray.
Remove, wash, and fill the water reservoir.
Return reservoir to unit.
Press power switch. Wait for 'NOT READY' then 'OPEN HEAD'.
Open and close brewing chamber. 'READY' will be displayed.
Press Brew to start cleansing cycle (no K-Cup). Dispose of hot water.

Troubleshooting and error codes

Problem	Solution
Brewer does not have power.	Plug Brewer into an independent outlet. Make sure the Brewer is securely plugged in. Plug into a different outlet. Reset your home's circuit breaker. Confirm the power has been turned on and the LCD is illuminated.
Brewer will not brew.	Lift off the reservoir, then put it back into place (air bubble). Turn off and unplug for 30 seconds, then power back on. Make sure water reservoir is in place and perform Rinse cycle. Ensure handle is down securely, LCD reads READY, buttons are illuminated. Check water level and reservoir seating if ADD WATER is indicated. Contact Customer Service if ADD WATER persists after refilling. Exit needle may be clogged.
Chlorine or mineral taste in coffee.	Consider using bottled, filtered, or Cuisinart Charcoal Water Filter.
Doesn't brew a full cup.	Lift off the reservoir, then put it back into place (air bubble). Turn off and unplug for 30 seconds, then power back on. Exit needle may be clogged. Clean K-Cup® holder brewing chamber. Make sure water reservoir is in place and perform Rinse cycle. De-scale the Brewer. Contact Customer Service if issue persists after de-scaling twice.
The time is not displayed on the LCD control panel.	Set the clock. Reset clock if power was interrupted.
Brewer shuts off, or turns on, automatically.	Check Auto Off and On/Off time features are not set to ON, reset if needed.
The blue light in the water reservoir is flashing.	Add water to reservoir.
Coffee is too weak or watery.	Reduce brew size for stronger coffee. Try an Extra Bold K-Cup®.

Troubleshooting and error codes

Problem	Solution
Brewer does not have power.	Plug Brewer into an independent outlet. Make sure the Brewer is securely plugged in. Plug into a different outlet. Reset your home's circuit breaker. Confirm the power has been turned on and the LCD is illuminated.
Brewer will not brew.	Lift off the reservoir, then put it back into place (air bubble). Turn off and unplug for 30 seconds, then power back on. Make sure water reservoir is in place and perform Rinse cycle. Ensure handle is down securely, LCD reads READY, buttons are illuminated. Check water level and reservoir seating if ADD WATER is indicated. Contact Customer Service if ADD WATER persists after refilling. Exit needle may be clogged.
Chlorine or mineral taste in coffee.	Consider using bottled, filtered, or Cuisinart Charcoal Water Filter.
Doesn't brew a full cup.	Lift off the reservoir, then put it back into place (air bubble). Turn off and unplug for 30 seconds, then power back on. Exit needle may be clogged. Clean K-Cup® holder brewing chamber. Make sure water reservoir is in place and perform Rinse cycle. De-scale the Brewer. Contact Customer Service if issue persists after de-scaling twice.
The time is not displayed on the LCD control panel.	Set the clock. Reset clock if power was interrupted.
Brewer shuts off, or turns on, automatically.	Check Auto Off and On/Off time features are not set to ON, reset if needed.
The blue light in the water reservoir is flashing.	Add water to reservoir.
Coffee is too weak or watery.	Reduce brew size for stronger coffee. Try an Extra Bold K-Cup®.