Brand: ZANUSSI
Category: Tumble Dryer
Document Type: Manual
Language: EN
Manual for TCE 7276 W
Uploaded: Nov. 21, 2025, 8:28 p.m.
Warranty Information
This appliance has a 12-month guarantee for faulty workmanship or materials, free of charge, with conditions.
To operate the tumble dryer, select a programme using the Programme/Time Selector Dial. Press the relevant option buttons (e.g., QUICK DRY, LOW TEMPERATURE, DELAY START) if needed. Press the START/PAUSE button to begin the cycle. The display shows the programme duration and counts down. Indicator lights show the drying phase, cooling phase, and end of cycle. After the cycle, clean filters and empty the water reservoir.
Troubleshooting and error codes
| Symptom | Possible causes |
|---|---|
| The tumble dryer does not start | The door(s) has (have) not been closed. |
| The plug is not properly inserted in the power socket. | |
| There is no current at the socket. | |
| The main fuse or the fuse in the plug has blown. | |
| The selector dial is not set correctly. | |
| The water reservoir is full or not properly inserted (the FULL TANK light is on ). The programme starts in any case but it stops after approx. 4 minutes. | |
| The START/PAUSE Button has not been depressed. | |
| The DELAY START option has not been selected. | |
| Drying takes too long or laundry is not dry enough. | The laundry has not been spun properly. |
| The filters and/or the condenser are clogged up. | |
| The water reservoir is full. | |
| The room temperature is too high. | |
| The selected time or drying cycle was not suitable for the laundry. | |
| The LOW TEMPERATURE button has been pressed. | |
| There is too much laundry inside the appliance. | |
| The dryer is not correctly installed. |