Brand: ZANUSSI
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for ZBB28651SA
Uploaded: Nov. 21, 2025, 6:43 p.m.
Warranty Information
None
First Use: Clean the interior with lukewarm water and neutral soap. Dry thoroughly. Avoid detergents and abrasive powders.
Daily Use: Movable shelves can be positioned as desired. Door shelves can be placed at different heights. Hints for energy saving include not opening the door frequently and setting the temperature appropriately. Hints for fresh food refrigeration involve storing food in airtight containers and not storing warm food or evaporating liquids.
Control Panel: Use the temperature regulator button to set temperature from 2-8°C. Press Quick Freeze button to activate/deactivate the Quick Freeze function.
Troubleshooting and error codes
| Problem | Possible cause | Solution |
|---|---|---|
| The appliance does not operate. The lamp does not operate. | The appliance is switched off. | Switch on the appliance. |
| The mains plug is not connected to the mains socket correctly. | Connect the mains plug to the mains socket correctly. | |
| The appliance has no power. There is no voltage in the mains socket. | Connect a different electrical appliance to the mains socket. Contact a qualified electrician. | |
| The lamp does not work. | The lamp is in stand-by. | Close and open the door. |
| The lamp is defective. | Refer to "Replacing the lamp". | |
| The compressor operates continually. | The temperature is not set correctly. | Set a higher temperature. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The door has been opened too frequently. | Do not keep the door open longer than necessary. | |
| Water flows on the rear plate of the refrigerator. | The product temperature is too high. | Let the product temperature decrease to room temperature before storage. |
| The room temperature is too high. | Decrease the room temperature. | |
| During the automatic defrosting process, frost defrosts on the rear plate. | This is correct. | |
| Water flows into the refrigerator. | The water outlet is clogged. | Clean the water outlet. |
| Products prevent that water flows into the water collector. | Make sure that products do not touch the rear plate. | |
| Water flows on the ground. | The melting water outlet does not flow in the evaporative tray above the compressor. | Attach the melting water outlet to the evaporative tray. |
| The temperature in the appliance is too low. | The temperature regulator is not set correctly. | Set a higher temperature. |
| The temperature in the appliance is too high. | The temperature regulator is not set correctly. | Set a lower temperature. |