Brand: ZANUSSI
Category: Oven
Document Type: Manual
Language: EN
Manual for ZOP37902
Uploaded: Nov. 21, 2025, 7:44 p.m.
Warranty Information
Refer to specific warranty documentation for details.
- Safety First: Always read safety instructions before installation and use. Keep packaging away from children. Keep children and pets away from the hot appliance.
- Installation: Must be performed by a qualified person. Ensure proper electrical connection and earthing.
- Daily Use: Activate appliance by pushing the knob. Select oven function and temperature. Deactivate by turning the knob to the off position. Be careful of hot air when opening the door.
- Clock Functions: Set time of day, duration, and end times. Use Minute Minder for countdowns.
- Accessories: Use trivet with grill/roasting pan.
- Additional Functions: Child Lock, Automatic switch-off, Cooling fan, Safety thermostat.
- Care and Cleaning: Clean with a soft, damp cloth and neutral detergent. Avoid abrasive materials. Pyrolytic cleaning for deep cleaning.
Troubleshooting and error codes
| Problem | Possible cause | Remedy |
|---|---|---|
| The oven does not heat up. | The appliance is deactivated. | Activate the appliance. |
| The oven does not heat up. | The clock is not set. | Set the clock. Refer to "Setting the time of day". |
| The oven does not heat up. | The necessary settings are not set. | Make sure that the settings are correct. |
| The oven does not heat up. | The automatic switch-off is on. | Refer to "Automatic switch-off". |
| The oven does not heat up. | The Child Lock is on. | Refer to "Deactivating the Child Lock". |
| The oven does not heat up. | The fuse in the fuse box is released. | Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician. |
| The oven lamp does not operate. | The oven lamp is defective. | Replace the oven lamp. |
| The Pyrolysis does not start. The display shows C3. | The door is not fully closed or the door lock is defective. | Fully close the door. |
| The display shows F102. | The door is not fully closed or the door lock is defective. | 1. Fully close the door. 2. Deactivate the appliance with the house fuse or the safety switch in the fuse box and activate it again. 3. If the display shows F102 again, contact the service centre. |
| The oven does not heat up. The display shows Demo. | The demo mode is activated. | 1. Deactivate the appliance. 2. Press and hold the button +. 3. When an acoustic signal sounds, turn the knob for the oven functions to the first function. Demo flashes in the display. 4. Turn the knob for the oven functions to the off position. 5. Release the button +. 6. Turn the knob for the temperature clockwise three times. The acoustic signal sounds three times. The demo mode is deactivated. |
| The display shows an error code that is not on this list. | There is an electronic fault. | 1. Deactivate the appliance with the house fuse or the safety switch in the fuse box and activate it again. 2. If the display shows the error code again, contact the service centre. |
| Steam and condensation collect on the food and in the oven. | You left the dish in the oven for too long. | Do not keep the dishes in the oven for longer than 15 - 20 minutes after the cooking ends. |