Brand:
Whirlpool
Category: Dryers
Document Type: Manual
Language: EN
Brand:
Whirlpool
Category: Dryers
Document Type: Manual
Language: EN
Uploaded: Nov. 21, 2025, 9:23 p.m.
Refer to the guarantee for specific warranty terms and conditions.
Refer to the programme chart for detailed information on each cycle.
\nEnsure laundry is properly sorted and prepared before drying.
\nChoose the appropriate programme and any desired options for your load.
\nFollow the steps to start and finish a drying cycle.
\nInstructions on how to modify a programme mid-cycle.
\nLearn how to pause or stop a running cycle.
\nRegular cleaning of the lint filter and other parts is essential.
\n\nIncludes unpacking, electrical connections, and installation guidelines.
\nDetailed steps for safe electrical hook-up, including fuse replacement.
\nEnergy saving tips, disposal of packaging, child safety, and general maintenance.
\nIdentifies the different parts of the appliance.
\nInstructions for installing the vent hose for external venting.
\nGuide on how to reverse the door opening direction.
\nHelps diagnose common problems and provides contact information for service.
\n| Problem | Possible Cause | Remedy |
|---|---|---|
| Drying takes too long / laundry is not dry enough | Was the correct programme selected? | Check programme selection. |
| Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm)? | Ensure adequate spin speed. | |
| Is the lint filter dirty (filter indicator lamp on)? | Clean the lint filter. | |
| Does "END" and "Anti-Crease" LED's are lights up? | Drying cycle is terminated, laundry can be taken out. | |
| The dryer does not operate: (following a power failure and/or interruption to the mains supply, always press the Start button). | Is the plug properly inserted into the mains electricity socket? | Check plug insertion. |
| Is there a power failure? | Check mains power supply. | |
| Has the fuse blown? | Check and replace fuse if necessary. | |
| Is the door well closed? | Ensure the door is properly shut. | |
| Has the programme been selected? | Select a programme. | |
| Has the start delay option been selected? | De-select start delay option. | |
| Has the Start/Pause button been pressed? | Press the Start/Pause button. | |
| Lint filter indicator lamp light on: | Is the lint filter clean? | Clean the lint filter. |
| Is the vent hose blocked? | Check and clear vent hose blockage. |