Manual for PDR-3300

Manual for PDR-3300

Brand: TOSHIBA

Category: Camcorder

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:16 p.m.

  • Getting Ready: Read safety precautions, understand manual conventions, and check accessories. Learn about camera parts and basic operation like turning the power ON/OFF, installing batteries and SD cards.
  • Taking Photographs: Explore various photography modes, including automatic settings, specific scenes (portrait, landscape, night), zoom, macro, self-timer, and flash usage. Learn to set image size, quality, white balance, and more advanced settings like aperture and shutter priority.
  • Playing Back Images: View photographed images and movies, enlarge them, use slideshows, and display detailed information.
  • Erasing Images: Learn to erase individual images, folders, or format the SD memory card.
  • Handy Functions: Discover features like resizing and compressing images, printing information, and protecting images.
  • Other Applications: Access basic camera settings (date, time, brightness, beep), image color settings, and transfer images to a PC.

Troubleshooting and error codes

Troubleshooting
No power supply The batteries are exhausted.
The AC adapter plug has come out from the power outlet.		 Replace with new batteries.
Plug the adapter back in.
The camera turns OFF during operation
The battery runs out quickly		 The batteries are exhausted.
You are using the camera in extremely cold conditions.
The terminals are dirty.		 Replace with new batteries.
Put the battery in your pocket or another warm place to heat it and then load it into the camera just before you take a picture.
Wipe the battery terminals with a clean, dry cloth.
No photograph is taken when the shutter button is pressed The battery has reached its effective life.
No SD Memory Card is loaded
The SD Memory Card is loaded incorrectly.
Not enough space on the SD Memory Card.
The SD Memory Card is write-protected.		 Replace with new batteries.
Load SD Memory Card.
Load the SD Memory Card correctly.
Load a new SD Memory Card.
Erase photograph images or change the size and quality to increase space on the SD Memory Card.
Remove the write-protection or replace with a new SD Memory Card.
I cannot use the flash to take pictures The SD Memory Card is not formatted.
The SD Memory Card is damaged.
The Auto Power OFF function is activated.
The mode dial has been changed to another setting..
The flash is set to Suppressed Flash mode
You pressed the shutter button while the flash was charging.		 Format the SD Memory Card.
Load a new SD Memory Card.
Turn the power on again
Set the mode dial to the correct setting.
Set the flash to Auto, Red-eye reduction or Forced flash mode.
Wait until charging is completed before pressing the shutter button
The flash will not charge The camera is set to Suppressed Flash mode. Set the flash to Auto, Red-eye Reduction or Forced Flash mode.
The playback image is too dark even though I used the flash The batteries are exhausted.
The subject is too far away.		 Replace with new batteries.
Move closer to the subjects. (about 0.8m~3.0m- WIDE setting)
The playback image is blurred The lens is not clean
The image is out of focus		 Clean the lens.
Set the FOCUS photography according to the distance up to the subject.
I cannot format the SD Memory Card The SD Memory Card is write-protected. Remove the write-protection.
I cannot erase all the frames. The frame is protected. Remove the write-protection.
Nothing happens when I use the buttons and switches The SD Memory Card is write-protected.
The mode dial is not at the correct position.
The camera is in the Auto Power OFF mode.
The camera is in the PC mode.		 Remove the write-protection.
Cancel the DPOF setting.
Set the mode dial to the correct setting.
Press the POWER button again to turn the camera on.
Change the camera to the photography or playback mode.
Nothing is displayed even through the LCD monitor is set to ON. Both the battery and AC adapter are removed with the power still on. Set the date and time again.
Privacy Policy