Brand: SONY
Category: TV
Document Type: Parts/Service
Language: EN
Parts/Service for KDL-32S3000
Uploaded: Nov. 21, 2025, 6:57 p.m.
Manual Publish Date: 2007.06
The service adjustments for this model can be performed using the supplied remote Commander RM-ED009. To enter Service Mode, turn on the main power switch and then press the following sequence of buttons on the Remote Commander: "i+" (ON SCREEN DISPLAY), "5" (DIGIT 5), and "+" (VOLUME +) together for approximately three seconds. "TT" will appear in the upper right corner of the screen. Press "MENU" on the remote commander to display the service menu. Navigate through the menu items using the up/down arrow buttons and enter sub-menus with the right arrow button. Press "MENU" again to exit Service Mode. After service adjustments, switch the TV set OFF and then ON to prevent customer access to the Service Menu.
Troubleshooting and error codes
| Number of LED Flashes | Error Description | Checked | Action |
|---|---|---|---|
| 02 | Balancer error. | In normal mode. | Goes into standby. |
| 03 | Power supply protection error. | In normal mode. | Goes into standby. |
| 04 | Panel error. | In normal mode. | Goes into standby. |
| 05 | NVM error. | In initialisation state. | Adds error to error menu. |
| 06 | IIC error. | In normal mode. | Adds error to error menu. |
| 07 | HDMI error. | In initialisation state. | Adds error to error menu. |
| 08 | Digital error. | In normal mode. | Adds error to error menu. |
| 09 | Tuner Error | In initialisation state. | Adds error to error menu. |
| 10 | Sound processor | In initialisation state. | Adds error to error menu. |
| 11 | WCG port error | In initialisation state. | Adds error to error menu. |
| 12 | WCG IC error | In initialisation state. | Adds error to error menu. |
| 13 | RTC error | In initialisation state. | Adds error to error menu. |
| 14 | FRCH error (Only models with FRCH) | In initialisation state. | Adds error to error menu. |