Manual for SBB 850 B1

Manual for SBB 850 B1

Brand: SilverCrest

Category: Kitchen Appliances

Document Type: Manual

Language: EN

Uploaded: April 20, 2026, 7:58 p.m.

Warranty Information

This device is sold with three years warranty from the date of purchase.

  • Choose from 12 different programmes.
  • Make your own breads according to your own recipes.
  • Process pre-made baking mixes.
  • Knead cake mixtures, bread roll or pasta dough.
  • Make marmalade or jam.
  • Process gluten-free baking mixes and recipes with gluten-free flours.
Many delicious baking mixes and ingredients for your own recipes can be bought at your local LIDL store.

Troubleshooting and error codes

Display indicates "HHH" Problem: A program was started although the automatic bread maker had not cooled down enough since the last baking process. Solution: Stop the programme and disconnect the mains plug. Let the automatic bread maker cool down with its cover (2) open for 20-30 minutes.
Program does not start and display jumps to programme 1 Problem: The automatic bread maker has not cooled down enough since the last baking process. Solution: Let the automatic bread maker cool down with its cover (2) open for 20-30 minutes.
Display indicates "EE0", "EE1" or "ELL" after programme starts Solution: Switch off the automatic bread maker and disconnect the mains plug. Then insert the mains plug again. If the error message is still displayed, please contact customer service.
The dough hook (6) is stuck in the baking tin (7) after baking Solution: Fill the baking tin (7) with hot water and turn the dough hook (6) so that the deposits can dissolve.
The dough hook (6) is stuck in the bread after baking Solution: Remove the dough hook (6) with the dough hook remover (10).
The motor turns, but the dough is not mixed Solution: Check whether the baking tin (7) and dough hooks (6) are locked into place correctly.
Automatic bread maker crushes fruit and nuts Solution: Only add ingredients such as fruit and nuts to the dough when the beep sounds and "ADD" is indicated on the display .
Automatic bread maker does not work Solution: Make sure that the mains plug is connected to the power supply and the power LED lights up. Use the programme sequence to try to determine the current phase of the automatic bread maker. Some programme steps are hard to recognise from the outside. Check whether the button was pressed correctly.
Privacy Policy