Manual for KH 6778

Manual for KH 6778

Brand: SilverCrest

Category: Electronics

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:28 p.m.

Manual Publish Date: 2005-05-01

Warranty Information

The product comes with a 36-month warranty from the date of purchase.

  • Connect the DVD player to a TV using SCART, S-Video, Composite Video, or Component Video connections.
  • Connect audio components via analog or digital cables to HiFi systems or receivers.
  • Use the OSD menu (accessed via the "Setup" button) to configure language, video, and audio settings.
  • Insert a DVD, VCD, S-VCD, Audio CD, or MP3/WMA CD into the player.
  • Use the remote control buttons (Play, Pause, Stop, Skip, etc.) to control playback.
  • Access general functions like sound volume, mute, child lock, and return to factory settings via the OSD menu.

Troubleshooting and error codes

Fault Possible cause/Remedy
The display is blank/ DVD Player does not indicate any function even though it has been switched on A Check that the power cable has been correctly plugged into a mains socket. B Check whether the mains socket is conducting power by connecting another electrical appliance to the same mains socket. C Switch off the DVD Player by pressing the "Power" button on the front panel, and wait for ten seconds. Then switch the DVD Player on again by pressing the "Power" button.
Display indicated "No Disc", even though a disc has been loaded A The disc is dirty, scratched or damaged. Clean the disc or load another disc. B The country/regional code of the loaded DVD/VCD/S-VCD does not match the regional/country code of the DVD Player. In this case the DVD/VCD/S-VCD cannot be played on the DVD Player.
The loaded disc won't play A condensation film may have formed on the laser scanning lens of the DVD Player. This is very likely if the DVD Player has been exposed to extreme temperature fluctuations. Place the DVD Player in a dry environment at normal room temperature. Remove the disc from the disc drawer. Leave the DVD Player switched on for at least one hour without using it to allow the condensation film to evaporate.
No picture or only a black-and-white picture A Check that all the connecting cables between the DVD Player and television (or video projector) have been firmly plugged into the correct sockets. B Check that the settings in the OSD menu match the manner of connection of the DVD Player with the television (or video projector). For this subject please refer to Chapter 6. "Connecting the DVD Player to a Television" C Refer to the operating instructions for the given television (or video projector) to check that all the settings have been made on the television that are necessary to use the DVD Player with the television.
No 4:3 or 16:9 screen format displayed A Refer to the operating instructions for the given television to establish the screen format. B Check whether the settings in the OSD menu conform with the television's available screen format.
None of the buttons on the DVD Player or remote control function/Other functions A Switch off the DVD Player by pressing the "Power" button on the front of the DVD Player. Wait for ten seconds and then press the "Power" button once again to switch the DVD Player on again. B If the faults continue to persist: Reset the works settings for the DVD Player. For this subject please refer to Chapter 17. "General Functions of the DVD Player".
No sound A Check whether the television and/or the DVD Player have been switched to mute mode. B Check whether all connecting cables between the DVD Player and connected audio components have been firmly inserted into the correct sockets. C Check whether the settings on the OSD menu match the manner of connection of the audio components with the DVD Player. For this subject please refer to Chapter 8. "Connecting Audio Components to the DVD Player". D Refer to the operating instructions for the given television to check that all the settings have been made on the television that are necessary to use the DVD Player with the television. E Refer to the operating instructions for connected audio components to find out whether settings have to be made to enable their use in connection with the DVD Player. F In the event that • the DVD Player has been connected to a stereo television and no audio components have been connected to the DVD Player, or • a Dolby Prologic-compatible audio component has been connected via the stereo output (with chinch cable in the "FL" and "FR" chinch sockets) of the DVD Player, as described in the chapter "Connecting a HiFi System" ... then check whether the settings in the "Audio" OSD menu item, "Size" sub-item, match the settings for Stereo-Downmix.
Remote control does not function A Check whether the batteries have been inserted in the remote control with the correct polarity. B Check whether the batteries in the remote control have become exhausted; exchange both batteries if necessary.. C Ensure that there are no obstacles between the remote control and the DVD Player. D Do not operate the remote control at a distance of more than five meters from the DVD Player.
Language playback/Subtitle language does not match the setting in the OSD menu. The playback language/subtitle language set in the OSD menu is not available on the loaded disc.
One or several functions cannot be switched on The selected function may not be available on all DVDs/VCDs/S-VCDs. If you attempt to carry out a function that is not available, then the symbol ∅ will be displayed on the television screen.
Privacy Policy