Brand: SilverCrest
Category: Electronics
Document Type: Manual
Language: EN
Manual for KH 6519/6520
Uploaded: Nov. 21, 2025, 6 p.m.
Warranty Information
The appliance has a 3-year warranty from the date of purchase, covering material or factory defects.
- Setup: Place the DVD player on a flat surface, remove protective foil. Connect to a television before plugging into power.
- Disc Playback: Insert DVD/VCD/S-VCD or Audio CD into the tray. Press OPEN/CLOSE to open/close the tray. Playback starts automatically or requires selection via menu.
- Media Playback: Use DVD/CARD/USB button to access memory cards or USB sticks. Navigate content using control buttons.
- OSD Menu: Press SETUP to access OnScreen Display menu for language, video, audio, and rating settings.
- Connections: Connect to TV via Scart, S-Video, Composite Video, VGA, Component, or HDMI. Connect audio components via cinch or digital cables.
- Functions: Features include chapter search, subtitle control, audio language selection, zoom, slow motion, programmed playback, and repeat functions.
- CD Ripping: Transfer audio from CDs to USB/memory cards in MP3 format.
- Switching Off: Press STANDBY for standby mode, or POWER for full shutdown.
Troubleshooting and error codes
| Display is blank/DVD player shows no functions even though it is switched on | |
| A | Check power cord connection. |
| B | Test power socket with another appliance. |
| Check if the display is switched off by the Dimmer function. | |
| Switch off the DVD player, wait ten seconds, then switch back on. | |
| The display shows "No Disc" even though there is a disc inserted | |
| Disc is dirty, scratched, or damaged. Clean or insert another disc. | |
| Country/Region code mismatch. | |
| Inserted disc will not playback | |
| Condensation may have built up on the laser lens. Allow the player to acclimatize in a dry environment for at least one hour with the disc removed. | |
| No image or Black/White image only | |
| A | Check all connection cables are firmly inserted. |
| B | Ensure OSD menu settings match the connection variant used. |
| Check TV/projector settings. | |
| No sound | |
| A | Check if the television and/or DVD player is muted. |
| B | Check all connecting cables to audio components are firmly plugged. |
| Ensure OSD menu settings match the connection variant used for audio components. | |