Brand: SIEMENS
Category: Washing Machine
Document Type: Manual
Language: EN
Manual for EXTRAKLASSE 1300
Uploaded: Nov. 21, 2025, 8:49 p.m.
Warranty Information
Aqua-Stop warranty compensates for water damage caused by a fault in the system, provided professional installation and use of original accessories.
Starting a wash cycle:
- Select the desired programme using the programme selector.
- (Optional) Set the spin speed and/or additional options.
- (Optional) Set the "Delay Start" button for delayed start.
- Press the "Start" button.
During the programme:
- Indicator lights show the current segment (Wash, Rinse, Spin).
- The "Finish In" display shows the remaining time.
When the programme has ended:
- The display shows "0".
- Turn the programme selector to "Off".
- Open the door and remove laundry.
Troubleshooting and error codes
| Fault | Possible Cause | Remedy |
|---|---|---|
| Washing machine does not switch on | Mains plug not plugged in. | Plug in mains plug. |
| Washing machine does not start | Start button not pressed. | Press the "Start" button. |
| No water supply | Water tap is turned off. | Turn on water tap. |
| Door cannot be opened | Programme has not finished. | Wait for programme to finish. |
| Excessive foam | Too much detergent used. | Use less detergent. Run "Rinse" programme. |
| Machine vibrates heavily | Transport bolts not removed. | Remove transport bolts. |
| Water not draining | Drain hose kinked or blocked. | Check and straighten drain hose. |
| Spin cycle not running | No Final Spin selected. | Select "Empty" or "Spin" programme. |
| Spin speed is too low | Spin speed selector not set correctly. | Set spin speed selector. |
| Clothes are not clean | Load is too large. | Reduce laundry load. |
| Greyish brown spots on laundry | Too little detergent. | Use more detergent. |
| Indicator lights flashing | Operation error. | Switch off machine, wait 30 seconds, switch on again. If fault persists, call customer service. |