Brand: SIEMENS
Category: Tumble Dryer
Document Type: Manual
Language: EN
Brand: SIEMENS
Category: Tumble Dryer
Document Type: Manual
Language: EN
Uploaded: Nov. 21, 2025, 7:33 p.m.
None
| Problem | Possible Cause | Remedy |
|---|---|---|
| Dryer does not start. | The appliance is not plugged in. | Plug in the appliance. |
| The Start/Stop button has not been pressed. | Press the Start/Stop button. | |
| Power failure. | Check the fuse/circuit breaker. | |
| The programme selector is not set correctly. | Set the programme selector. | |
| Door is not closed properly. | Close the door. | |
| Child safety lock is engaged. | Release the child safety lock (press and hold Start/Stop for 4 seconds). | |
| The laundry is not dry or not dry enough. | The programme or setting is incorrect. | Select a more intensive programme or a higher level of dryness. |
| Laundry load is too large. | Reduce the laundry load. | |
| The fluff filter is blocked. | Clean the fluff filter. | |
| The condenser unit is dirty. | Clean the condenser unit. | |
| The water container is full. | Empty the water container. | |
| The drying time was too short. | Select a longer drying time or a programme with a longer duration. | |
| The laundry is too creased. | The laundry has been over-dried. | Select a programme with a lower drying level or use the "Iron dry" setting. Remove laundry promptly. |
| The laundry has been left in the dryer for too long after the programme has ended. | Use the Anti-crease function. Remove laundry promptly. | |
| The laundry was not spun sufficiently. | Increase the spin speed of the washing machine. | |
| The dryer makes noises. | Foreign objects in the drum. | Remove foreign objects. |
| The dryer is not standing level. | Adjust the feet. | |
| The woollens basket is not fitted correctly. | Fit the woollens basket correctly. | |
| Water is leaking. | The water container is not inserted correctly. | Insert the water container correctly. |
| The fluff filter is not inserted correctly. | Insert the fluff filter correctly. | |
| The condenser unit is not inserted correctly. | Insert the condenser unit correctly. | |
| The indicator lamps are flashing. | A fault has occurred. | Switch off the dryer and wait for 1 minute. Then switch it on again. If the fault persists, contact customer service. |