Manual for HB213AB.3

Name: Manual for HB213AB.3
Brand: SIEMENS
Availability: InStock

Brand: SIEMENS

Category: Oven

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 8:16 p.m.

Warranty Information

Detailed warranty information is available from after-sales service, your retailer, or the website.

Basic Operation

Switching on the appliance: Turn the function selector to any position other than "Off".

Setting type of heating and temperature: Use the function selector for heating type and the temperature selector for temperature/grill setting. The appliance starts heating automatically.

Switching off the appliance: Turn the function selector to the "Off" position.

Rapid heating

To save time, use rapid heating for preheating. Suitable for 3D hot air. Place food in the compartment only after rapid heating has ended.

Time-setting options

Control operation with Timer, Cooking time, or End time settings. Use the +/- buttons to adjust values and the <0xE2><0x96><0xBD> button to cycle through options.

Cleaning

Clean the appliance using suitable cleaning agents. Always allow the appliance to cool down before cleaning. Remove food remnants regularly.

Troubleshooting and error codes

Fault	Cause and troubleshooting
The appliance is not working.	The circuit breaker in the fuse box has tripped. Check the circuit breaker. There has been a power cut. Check lighting or other appliances. Electronics fault: Disconnect power for 30 seconds, then reset to factory settings.
The appliance does not switch off fully at the end of a cooking time.	At the end of cooking, heating stops, but the oven light and cooling fan may remain on. Turn the function selector to the "Off" position. The cooling fan switches off automatically when cooled.
SAFE lights up in the display and no settings can be made on the appliance.	Childproof lock is activated. Use the ⌫ button to deactivate.
A message with E appears in the display, e.g. E05-32.	Electronics fault. Press the ⌫ button. If required, reset the time. If the error persists, call after-sales service and quote the exact error message and E-Nr.