Brand: SIEMENS
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for SN63EX14CE
Uploaded: Nov. 21, 2025, 6:44 p.m.
Warranty Information
Contact Customer Service for warranty claims and repairs.
- Safety First: Always read and follow safety instructions to ensure safe appliance use. Keep the manual for future reference.
- Intended Use: Use the appliance only for cleaning household tableware in a domestic environment.
- Installation: Follow the installation instructions carefully, ensuring correct power and water connections.
- Basic Operation: Familiarize yourself with the appliance parts and controls. Select a programme, add detergent, and start the cycle.
- Maintenance: Regularly clean the filter system, spray arms, and interior to ensure optimal performance.
- Troubleshooting: Consult the manual for solutions to common faults and errors.
Troubleshooting and error codes
| Fault | Cause | troubleshooting |
| Rust spots on cutlery. | Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. | Use rust-resistant tableware. |
| Cutlery may also rust if washed together with rusting items. | Do not wash rusting items. | |
| Salt content in washing water is too high. | 1. Remove any spilled special salt from the tub. 2. Screw the cap of the special salt dispenser on tight. |
|
| Detergent residue is present in the detergent dispenser or the tablet collecting tray. | Spray arms were blocked by tableware so detergent was not rinsed out. | Check that the spray arms are not blocked and can rotate freely. |
| Detergent dispenser was damp when detergent was added. | Only add detergent to a detergent dispenser when dry. | |
| Excessive formation of foam occurs. | Hand washing-up liquid is present in dispenser for rinse aid. | Immediately add rinse aid to the dispenser. → "Adding rinse aid", Page 26 |
| Rinse aid has been spilled. | Remove the rinse aid with a cloth. | |
| Detergent or appliance care product used causes excessive foaming. | Change the brand of detergent. | |
| Home Connect problem | ||
| Connection to home network is not established. | WLAN on router is not active. | Check the wireless network connection of your router. |
| WLAN display is flashing. | Connection to home network is not available. | Activate the wireless network connection on your router. |
| Home Connect cannot be implemented correctly. | Home Connect set incorrectly. | Please consult the documents supplied for Home Connect. |
| Technical fault is present. | Please consult the information about support in the documents supplied for Home Connect. |