Brand: SHARP
Category: Home Appliances
Document Type: Manual
Language: EN
Manual for QW-NA1CF47EB-EN
Uploaded: Nov. 21, 2025, 8:13 p.m.
Warranty Information
Contact customer service for warranty information, with spare parts available for at least 10 years.
General Operation:
Before first use, prepare the dishwasher by setting the water softener level and filling the rinse aid compartment. Load dishes, ensuring they are suitable for dishwashing and not overcrowding the baskets. Select the appropriate wash program from the control panel, which includes options like Quick 30', Eco, Express 50', Intensive 65°, and Auto. Use the recommended amount of detergent. After the program finishes, allow for drying assistance by opening the door slightly. For safety, always switch off the machine, unplug it, and turn off the water tap when not in use or before maintenance.
Key Functions:
* Program Selection: Choose from various wash programs based on soil level and desired outcome.
* Detergent & Rinse Aid: Proper use is crucial for optimal cleaning and drying. Refill compartments as needed.
* Loading: Follow guidelines for efficient loading of upper and lower baskets.
* Maintenance: Regularly clean filters and spray arms for optimal performance.
Troubleshooting and error codes
| TROUBLE CODE | POSSIBLE FAULT | WHAT TO DO |
|---|---|---|
| FF | Water inlet system failure | Make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues. |
| F5 | Pressure system failure | Contact for service. |
| F3 | Continuous water input | Close the tap and contact for service. |
| F2 | Inability to discharge water | Water discharge hose and filters may be clogged. Cancel the program. If the error continues, contact for service. |
| F8 | Heater error | Contact for service. |
| F1 | Overflow | Unplug the machine and close the tap. Contact for service. |
| FE | Faulty electronic card | Contact for service. |
| F7 | Overheating | Contact for service. |
| F9 | Divisor position error | Contact for service. |
| F6 | Faulty heater sensor | Contact for service. |
| HI | High voltage failure | Contact for service. |
| LO | Low voltage failure | Contact for service. |