Brand: SELECLINE
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for DF1-28N-4
Uploaded: April 20, 2026, 8:03 p.m.
Warranty Information
The warranty covers manufacturing or material defects for 12 to 24 months, excluding improper installation or use.
Safety Instructions: Read instructions carefully. Ensure proper ventilation. Do not use mechanical devices for defrosting. Avoid flammable substances. Handle with care.
Installation: Ensure sufficient space for door opening. Level the unit using adjustable feet. Position away from heat sources. Connect to a grounded power supply.
Use: Clean interior before first use. Set temperature using the thermostat (1=warmest, 7=coldest, 0=off). Place different foods in designated compartments. Recommended settings vary by environment temperature (summer, normal, winter).
Freezing: Use the freezer for fresh and deep-frozen foods. Allow 24 hours for freezing. Store defrosted food or cook immediately.
Cleaning & Care: Regularly clean the interior with mild soap and water. Do not use abrasive cleaners or steam cleaners. Defrost the freezer when frost builds up.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
| Appliance doesn't work. | Temperature regulation knob is set at number 0. | Set the knob at another number to switch on the appliance. |
| Mains plug is not plugged in or is loose. | Insert mains plug. | |
| Fuse has blown or is defective. | Check fuse, replace if necessary. | |
| Socket is defective. | Mains malfunctions are to be corrected by an electrician. | |
| The food is too warm. | Temperature is not properly adjusted. | Please review the Temperature Setting Recommendation section. |
| Door was left open for an extended period of time. | Open the door only as long as necessary. | |
| A large quantity of warm food was placed in the appliance within the last 24 hours. | Temporarily turn the temperature regulator to a colder setting. | |
| The appliance is situated near a heat source. | Please review the Installation Location section. | |
| Appliance cools too much. | Temperature is set too cold. | Temporarily turn the temperature regulation knob to a warmer temperature. |
| Unusual noises. | Appliance is not level. | Adjust the levelling feet. |
| The appliance is touching the wall or other object. | Move the appliance slightly until it is standing clear. | |
| A component, such as a pipe, on the rear of the appliance is touching another part of the appliance or the wall. | If necessary, carefully bend the component out of the way. | |
| Water on the floor. | The water drain hole is blocked. | Please review the Cleaning the Drain Hole section. |
| Side panel is hot. | The condenser is inside the side panel. | This is normal. |