Brand: SANYO
Category: Phone
Document Type: Manual
Language: EN
Manual for CLT2410
Uploaded: Nov. 21, 2025, 8:31 p.m.
Manual Publish Date: 2000-07-18
Warranty Information
Sanyo Communications products are warranted against manufacturing defects for ONE YEAR from the date of purchase.
Making and Receiving Calls
- To answer a call: Press any key in standby mode.
- To make a call: Press TALK/END, listen for dial tone, then dial the number. Press TALK/END again.
- To hang up a call: Press TALK/END.
- To redial last number: Press TALK/END, listen for dial tone, then press REDIAL.
AutoTalk and Auto Standby
AutoTalk: Answer a call by picking up the handset from the base.
Auto Standby: Hang up by returning the handset to the base.
Storing a Number in Memory
- Press MEMORY.
- Enter the phone number (up to 20 digits).
- Press MEMORY and a number (0-9) for the memory location.
Troubleshooting and error codes
| Problem | Suggestion |
|---|---|
| CHARGE/IN USE indicator won't come on when handset is placed in base. | Make sure the AC adaptor is plugged in, handset is properly seated, battery pack is connected, and charging contacts are clean. |
| Weak and/or scratchy sound | Ensure the base antenna is vertical. Check for interference from electronics. Move base away from appliances. Press SCAN for clearer reception. |
| Can't make or receive calls. | Check telephone line cord. Ensure AC adaptor is plugged in. Disconnect and reconnect AC adaptor. Reset security code by placing handset on base. Battery pack may be weak; charge for 15 hours. |
| Handset doesn't ring or receive a page. | Battery pack may be weak; charge for 15 hours. Handset may be too far from base. Place base away from appliances. Reset security code. |