Brand: Philips
Category: Electronics
Document Type: Manual
Language: EN
Manual for M888
Uploaded: Nov. 21, 2025, 8:30 p.m.
Warranty Information
No warranty information is available in the provided pages.
- Making Calls: Dial numbers directly, use speed dial, redial list, or phonebook. Answer calls by pressing the answer key. End calls by pressing the end call key or placing the handset on the base station.
- Phonebook: Store up to 250 contacts with names and numbers. Access contacts, search, add, edit, and delete entries. Use speed dial keys for quick access.
- Intercom and Conference Calls: Make calls between handsets. Transfer calls. Set up 3-way conference calls with external callers.
- Settings: Configure display (brightness, clock, backlight), sound (ringtone volume, key tone), phone settings (date/time, auto answer, ECO modes), and text input.
- Answering Machine: Turn on/off, set language, answer mode, and manage incoming messages.
- Baby Monitor: Activate/deactivate the baby unit and set alerts.
Troubleshooting and error codes
| Problem | Possible cause | Solution |
| No signal bar is displayed on the screen. | The handset is out of range. | Move it closer to the base station. |
|---|---|---|
| Handset not registered. | Put the handset on the base until the signal bar appears. | |
| My handset is in searching status, what do I do? | Base station has no power supply. | Make sure that the base station has power supply. |
| Handset not registered. | Register the handset to the base station. | |
| Handset is out of range. | Move the handset closer to the base station. | |
| If I fail to pair (register) additional handsets to the base station, what do I do? | Base memory is full. | Unregister the unused handsets and try again. |
| I have chosen a wrong language which I cannot read, what do I do? | Incorrect language selected. | Press to go back to the standby screen, press to access the main menu, then select the language option and choose the correct language. |
| No dialing tone | Phone connections issue. | Check your phone connections. |
| Handset is out of range. | Move it closer to the base station. | |
| No docking tone | Handset not placed properly on the base station/charger. | Place the handset properly on the base station/charger. |
| Dirty charging contacts. | Disconnect the power supply and clean the contacts with a damp cloth. | |
| I cannot change the settings of my voice mail, what do I do? | Voice mail service managed by provider. | Contact your service provider to change the settings. |
| The handset on the charger does not charge. | Batteries inserted incorrectly. | Make sure the batteries are inserted correctly. |
| Handset not placed properly on the charger. | Make sure the handset is placed properly on the charger. | |
| Docking tone setting is off. | Make sure the docking tone setting is turned on. | |
| Dirty charging contacts. | Disconnect the power supply and clean the contacts with a damp cloth. | |
| Defective batteries. | Purchase new batteries with the same specifications. | |
| No display | Batteries are not charged. | Make sure the batteries are charged. |
| No power to the phone. | Make sure there is power and the phone is connected. | |
| Bad audio (crackles, echo, etc.) | Handset is nearly out of range. | Move it closer to the base station. |
| Interference from electrical appliances. | Move the base station away from them. | |
| Thick walls. | Move the base away from them. | |
| The handset does not ring. | Ringtone is turned off. | Make sure the handset ringtone is turned on. |
| The caller ID does not display. | Service not activated. | Check with your service provider. |
| Caller's information is withheld or unavailable. | None. |