Brand: MITSUBISHI ELECTRIC
Category: TV
Document Type: Manual
Language: EN
Manual for WD-82CB1
Uploaded: Nov. 21, 2025, 7:08 p.m.
Warranty Information
A one-year limited warranty covers parts and labor for most components, with specific terms for the screen and embedded software.
Basic TV Operations
Setting Favorites (FAV)
Quickly access favorite channels or inputs. You can store up to nine favorites.
- Adding: Tune to the desired channel/input, press FAV, select a number position, and press ENTER.
- Removing: Press FAV, highlight the item in the Favorites menu, and press CANCEL.
- Tuning: Press FAV and then the number key for the desired favorite.
Sleep Timer
Set the TV to turn off automatically after a set time.
- Press SLEEP to set the timer in 30-minute increments up to 120 minutes.
- Press SLEEP repeatedly to cancel the timer (OFF).
ChannelView Listings
Displays program descriptions sent by broadcasters.
- Press GUIDE to display listings.
- Use MENU to select channel banks or move through channels.
- Press ENTER to add/remove channels from a bank.
Picture Shape and Display Formats
Use the FORMAT key to adjust the picture's aspect ratio and display format (e.g., Standard, Expand, Zoom, Stretch, Narrow).
Status Display
Press INFO to view information such as current input, channel number, program name, signal type, and signal strength.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| No picture or poor picture quality | Connections loose or incorrect | Check all cable connections. Ensure correct input is selected. |
| No sound or poor sound quality | Volume muted or set too low; incorrect audio settings | Check volume and mute status. Verify audio settings (e.g., TV Speakers On/Off, Sound Mode). |
| Remote control not working | Batteries dead or not inserted correctly; obstruction | Replace batteries. Ensure clear line of sight to the TV. |
| TV not responding to controls | System lock engaged; temporary software glitch | Check for Control Panel Lock. Perform a System Reset by holding the POWER button for 10 seconds. |
| Image distortion | Incorrect picture format; weak signal | Adjust Picture Shape/Format. Check antenna connection and signal strength. |