Brand: Miele
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for G 6XX
Uploaded: Nov. 21, 2025, 7:56 p.m.
Warranty Information
None
Before using for the first time: Ensure you have water, dishwasher salt, detergent, and rinse aid. Fill the water softener with salt if needed, and program the water hardness level. Add rinse aid to its reservoir and set the dosage.
Loading the dishwasher: Remove coarse food residues. Load crockery so water can reach all surfaces, ensuring items are secure and hollow items are inverted. Do not overload.
Operating the dishwasher: Add detergent, select a programme using the programme selector, and press "Start". The programme sequence display indicates progress. Switch off using the "On/Off" button at the end.
Cleaning and care: Regularly clean filters, spray arms, and the wash cabinet. Clean the control panel and door front.
Troubleshooting: Refer to the problem-solving guide for common issues.
Troubleshooting and error codes
| Solving problems | |
| Problem | Possible cause and remedy |
| The machine does not start. | The machine is not switched on. |
| The "Start" button has not been pressed. | |
| The door has not been closed correctly. | |
| The programme has not been selected. | |
| The child safety lock is activated. | |
| The water inlet is not turned on. | |
| The supply hose is kinked. | |
| The house fuse has blown or the circuit breaker has tripped. | |
| The machine is not filling with water. | The water inlet valve is not open. |
| The house fuse has blown or the circuit breaker has tripped. | |
| The supply hose is kinked. | |
| The water inlet filter is blocked. | |
| Water remains in the machine after the programme has finished. | The drain hose is kinked. |
| The drain pump is blocked. | |
| The non-return valve is blocked. | |
| The machine is not cleaning properly. | The spray arms are blocked. |
| The filters are blocked. | |
| The correct programme has not been selected. | |
| Too much or too little detergent has been used. | |
| The dishwasher has been overloaded. | |
| Rinse aid has not been added or the dosage is incorrect. | |
| The water hardness has not been set correctly. | |
| There are water marks on the crockery. | The rinse aid dosage is too low. |
| The rinse aid reservoir is empty. | |
| The water hardness is too high for the selected programme. | |
| There are food residues on the crockery. | The dishwasher has been overloaded. |
| The spray arms are blocked. | |
| The filters are blocked. | |
| The correct programme has not been selected. | |
| The selected programme is not intensive enough. | |
| The machine is making unusual noises. | The spray arms are being impeded by items of crockery. |
| The machine is not level. | |
| The machine has not been installed correctly. | |
| The door does not open or close properly. | The door is being impeded by crockery. |
| The machine is not level. | |
| The salt indicator light is on. | The salt reservoir is empty. |
| (See "Filling the salt reservoir" section). | |
| The rinse aid indicator light is on. | The rinse aid reservoir is empty. |
| (See "Adding rinse aid" section). | |