Brand: Makita
Category: Power Tool
Document Type: Manual
Language: EN
Manual for VC4210M
Uploaded: Nov. 21, 2025, 6:05 p.m.
Manual Publish Date: 2017-01-02
Warranty Information
Contact your dealer or Makita service representative for after-sales service details.
This manual provides instructions for the Makita VC4210M wet and dry vacuum cleaner.
Before Use:
- Read the entire operating instructions.
- Unpack accessories (A1).
- Install filter bag (A2) or disposal bag (A3).
- Connect hose and operate (A4).
- Install accessories (A5).
- Mount adapter plate (A6) and trolley handle (A7) if applicable.
Operation:
- Connect power (C1).
- Start the machine using the switch (0, I, AUTO settings).
- AutoClean system for filter cleaning (B2).
- Flow rate warning system (B1).
- Auto-On/Off socket for power tools (3.2).
After Use:
- Clean the machine and empty the container.
- Disconnect power.
- Store properly.
Maintenance:
- Regular servicing and inspection are required.
- Specific maintenance tasks include filter replacement (D1, D2, D3), cleaning the cooling air diffuser (D4), and cleaning gaskets/floater (D5).
Troubleshooting and error codes
| Symptom | Possible Cause | Remedy |
|---|---|---|
| Machine does not start | No power supply | Check power cord and outlet. |
| Reduced suction power | Container or filter bag is full. | Empty container or replace filter bag. |
| Air flow is reduced in suction hose, tube/nozzle, filter. | Check and clean hose, tube, nozzle, and filter. | |
| Cooling air filter is clogged. | Clean the cooling air filter. | |
| Machine stops | Overload protection activated. | Allow machine to cool down. |
| Water level limit reached (during wet pick-up). | Switch off, disconnect, and empty container. | |
| Foam appears | Water level limit system needs cleaning. | Clean the water level limiting device. |
| Antistatic effect not working | Antistatic connection is not maintained. | Ensure antistatic connection is kept when inserting disposal bag. |