Manual for DVD5083

Brand: LG logo LG

Category: Home Theater System

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:26 p.m.

Warranty Information

This guarantee covers faulty components for 12 months from the original purchase date.

Playing a DVD: Turn on the TV and select the appropriate input. Insert the DVD, close the tray. The player will automatically start playback or display the disc menu. Use the remote control buttons (e.g., TITLE, MENU, chapter navigation, PLAY, STOP, PAUSE) to control playback and navigate menus.

DVD Features: Explore features like moving between titles and chapters, slow motion, still picture, search, repeat (chapter, title, A-B), time search, zoom, 3D Surround, and marker search. Access special features via Title Menu or Disc Menu.

Playing Audio CD and MP3 Disc: Insert the disc. Use / to select a track and press PLAY. Control playback with STOP, PAUSE, SKIP/SCAN for moving tracks, REPEAT (track, all, off), RANDOM, and A-B repeat. Select "3D SUR" for surround sound or change audio channels.

Programmed Playback: Store favorite tracks by entering Program Edit mode, selecting tracks, and adding them to a list. Play back programmed tracks in order.

Initial Settings: Set preferences for language, picture, sound, and parental control via the SETUP menu.

Troubleshooting and error codes

Symptom	Cause	Correction
No power.	• The power cord is disconnected.	• Plug the power cord into the wall outlet securely.
The power is on, but the DVD player does not work.	• No disc is inserted.	• Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.)
The power is on, but the DVD player does not work.	-	-
No picture.	• The TV is not set to receive DVD signal output.	• Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen.
	• The video cable is not connected securely.	• Connect the video cable into the jacks securely.
	• The connected TV power is turned off.	• Turn on the TV.
	-	-
No sound.	• The equipment connected with the audio cable is not set to receive DVD signal output.	• Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player.
	• The audio cables are not connected securely.	• Connect the audio cable into the jacks securely.
	• The power of the equipment connected with the audio cable is turned off.	• Turn on the equipment connected with the audio cable.
	• The Digital Audio Output is set to the wrong position.	• Set the Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER.
	• The disc is dirty.	• Clean the disc.
	• No disc is inserted.	• Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)
The playback picture is poor.	• The disc is dirty.	• Clean the disc.
	• No disc is inserted.	• Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)
	• An unplayable disc is inserted.	• Insert a playable disc. (Check the disc type, color system and Regional code.)
The DVD player does not start playback.	• The disc is placed upside down.	• Place the disc with the playback side down.
	• The disc is not placed within the guide.	• Place the disc on the disc tray correctly inside the guide.
	• The Rating level is set.	• Cancel the Rating function or change the rating level.
The remote control does not work properly.	• The remote control is not pointed at the remote sensor of the DVD player.	• Point the remote control at the remote sensor of the DVD player.
	• The remote control is too far from the DVD player.	• Operate the remote control within about 23 ft (7 m).
	• There is an obstacle in the path of the remote control and the DVD player.	• Remove the obstacle.
	• The batteries in the remote control are exhausted.	• Replace the batteries with new ones.