Manual for KAWE700T

Manual for KAWE700T

Brand: KitchenAid

Category: Washer

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:46 p.m.

Warranty Information

One year full warranty, five year limited on cabinet, and ten year limited on gearcase and outer tub.

Operating Your Washer:

  1. Add measured detergent.
  2. Add sorted wash load.
  3. Make selections: water level, water temperature, and wash cycle.
  4. Close the washer lid (essential for spinning).
  5. Start the washer.

Key Features & Settings:

  • Water Level Selector: Choose SMALL, MEDIUM, or LARGE based on load size.
  • Temperature Selector: Select wash and rinse water temperatures (HOT, WARM, COLD).
  • Cycle Control Knob: Push to set, pull to start. Cycles include HEAVY, PERMANENT PRESS, REGULAR, and KNITS/DELICATE, each with specific agitation and spin speeds.
  • Dispensers: For liquid bleach and fabric softener.
  • Self-Clean Lint Filter: Collects lint automatically.

Troubleshooting and error codes

Problem Cause
Lint
  • clogged lint filter
  • improper sorting
  • paper or tissue in pockets
  • pilling being mistaken for lint
  • overloading
  • not enough detergent
Yellow Areas - Built-Up Body Oils
  • water temperature too low
  • not enough detergent
Snags, Rips, Holes
  • misuse of chlorine bleach
  • sharp articles not removed from pockets, etc.
  • items damaged before washing
  • fasteners not fastened
Stiff, Rough Fabrics (usually Cottons)
  • spin too slow or too short
  • using soap in water that is too hard
  • not enough detergent
  • line drying
Gray Whites or Dingy Colors
  • improper sorting
  • water temperature too low
  • not enough detergent
  • using soap in water that is too hard
Greasy-Looking Spots
  • undiluted fabric softener
  • fabric softener in wash water
  • not enough detergent
Brown or Yellow Stains
  • chlorine staining
  • iron in water heater or pipes
  • iron and manganese in water
  • washer basket rusted from excessive soaking
Load Too Wet After Spin
  • slow spin
  • cold rinses
  • lid is opened before spinning is completed
Shrinking
  • fabric type (some knits stretch during manufacturing, and laundering returns fabric to original size)
  • care label directions not followed
Dye Transfer
  • improper sorting
  • load left in washer
  • overloading
  • improper loading
Twisting/Tangling
  • overloading
  • improper loading
Wrinkling
  • overloading
  • improper spin speed
  • load not immediately removed from washer after cycle is completed
  • improper rinse temperature
  • poor permanent press finishes
  • cycle selection is incorrect, based on fabric type
Privacy Policy