Manual for kil60w18

Name: Manual for kil60w18
Brand: KENWOOD
Availability: InStock

Brand: KENWOOD

Category: Refrigerator

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 9:11 p.m.

Warranty Information

This manual provides information on usage, safety, and maintenance, but does not specify a warranty period.

Connect the mains cable to the socket. The internal temperature is controlled by a thermostat (0=off, 7=coldest).
Adjust the thermostat dial between 2-4 for normal temperatures (16-38°C), and 5-7 for hotter environments.
Wait 24 hours before filling the unit with food to ensure it reaches the correct temperature.
Cooked meats/fish should be stored above raw meats/fish. Keep raw meats/fish in a container on the lowest shelf.
Ensure good air circulation by leaving space around food.
Pack or cover food separately to prevent flavour transfer and drying.
Let pre-cooked food cool down before storing.
Limit door openings to retain cold air.
Frost accumulates and defrosts automatically. Ensure the drain hole is clear.
Clean the interior with bicarbonate soda solution and warm water; exterior with a damp cloth.
The internal light is an LED panel and cannot be changed by the user.

Problem	Possible Cause	Solution
Unit does not operate	Power supply interrupted.	Check plug and fuse.
	Thermostat set to 0.	Set thermostat to a higher position.
Compressor runs continuously	The temperature is set too high.	Adjust thermostat to a lower position.
	The door is not closed properly.	Check door seal for damage and ensure it is clean.
	The unit is in a particularly hot room.	See Climate Class in Specifications.
Excessive frost build-up	The door is not closed properly.	Check door seal for damage and ensure it is clean.
	The unit is not defrosted regularly.	See defrosting.
Unit is not cold enough	The temperature is set too low.	Adjust thermostat to a higher position.
	The door is not closed properly.	Check door seal for damage and ensure it is clean.
	The unit has been recently switched on.	Wait 24 hours for the unit to reach the correct temperature.
	The unit is located in a particularly hot room.	See Climate Class in Specifications.
Condensation on the outside of the unit	High humidity in the room.	Wipe off any moisture residue. If problem continues, contact a qualified technician.