Brand: KENWOOD
Category: Refrigerator
Document Type: Installation Guide
Language: EN
Installation Guide for KIFF7017
Uploaded: Nov. 21, 2025, 7:11 p.m.
Warranty Information
None
Switching On: Connect the mains cable. Control panel lights will illuminate for 3 seconds. The default temperature is 5°C. Wait 24 hours before filling with food to ensure adequate cooling. A special thermometer can be used to check temperatures; fridge should be 5°C or lower, freezer -18°C or lower.
Control Panel: Use the 'Temp' button to adjust temperature. 'Super Cool' mode rapidly decreases temperature for 3 hours. An 'Alarm' indicator flashes and a buzzer sounds for abnormal conditions or if the door is left open for over 2 minutes. The 'Power' button switches the unit on/off.
Adjusting Temperature: Press the 'Temp' button; the corresponding indicator will light up.
Noises: Unusual noises are normal due to refrigerant circulation and compressor motor; this is not a fault.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not operating / not cooling | Mains plug not connected or has tripped. | Connect plug / check fuse or circuit breaker. |
| Incorrect temperature setting. | Adjust temperature setting. | |
| Door not closed properly. | Ensure door is closed correctly. | |
| Compartment vents blocked. | Ensure vents are clear. | |
| Unit has just been switched on. | Allow time for unit to cool down. | |
| Power supply interrupted. | Check power supply. | |
| Sudden loud noises | Unit is not level. | Ensure unit is level. |
| Component is touching another part. | Check components. | |
| Excessive cooling/freezing in fridge compartment | Temperature too low. | Adjust temperature setting. |
| Food is blocking air vents. | Rearrange food. | |
| Condensation on the outside of the unit | Room temperature change. | Wipe off moisture. If problem continues, contact technician. |