Brand: KENWOOD
Category: Refrigerator
Document Type: Installation Guide
Language: EN
Installation Guide for KFC60B15 / KFC60W15 / KFC60X15
Uploaded: Nov. 21, 2025, 7:42 p.m.
Warranty Information
The manual does not contain specific warranty information.
Switching on your unit: Connect the mains cable. Use the electronic control panel to set the temperature for the fridge (2-8°C) and freezer (-16 to -24°C). Wait 24 hours before filling with food to ensure correct temperature. Use a fridge/freezer thermometer to check temperatures if concerned.
Super freeze mode: Press and hold 'Freezer' for 3 seconds to activate. The freezer temperature will lower quickly. To deactivate, press and hold 'Freezer' for 3 seconds or it will automatically deactivate after 26 hours.
Holiday mode: Press and hold 'Fridge' for 3 seconds to activate. Fridge temperature will be set to 15°C. Do not store food in the fridge during this mode. To deactivate, press and hold 'Fridge' for 3 seconds.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| The unit is not operating. | The unit is not switched on. | Ensure the unit is plugged into a working socket. Check the fuse/circuit breaker in your home. |
| The compressor runs continuously. | The door is not closed properly or is open for too long. The ambient temperature is too high. The temperature is set incorrectly. |
Close the door properly. Avoid opening the door unnecessarily. Ensure the unit is not exposed to direct sunlight or near heat sources. Check the temperature setting. |
| Ice-Icing occurs in the freezer. | The door is not closed properly or is open for too long. The temperature is set incorrectly. |
Close the door properly. Avoid opening the door unnecessarily. Check the temperature setting. |
| Loud noises. | The unit is not level. The unit is touching other appliances or furniture. |
Adjust the levelling feet. Ensure there is adequate space around the unit. |
| Condensation on the outside of the unit. | Change in room temperature. | Wipe off any moisture residue. If the problem continues, contact a qualified technician. |
| The internal light is not working. | The LED panel needs to be replaced. | Please contact a qualified service agent. |