Manual for KDW60W15 / KDW60B16 / KDW60S16

Starting a Wash Cycle

1. Ensure the unit is connected to mains power and water supply is fully opened (0.04 MPa to 1.00 MPa).
2. Open the door, pull out baskets, load dishes, and push baskets back. Load lower basket first, then upper.
3. Pour detergent or place tablet in dispenser, close firmly.
4. Close the dishwasher door (a click should be heard).
5. Press the power button (U).
6. Press the 'P' button to select a wash programme based on load and soil.
7. Press the start/pause button (►II) to begin.

Changing a Programme

1. Open door slightly to avoid spillage. Check if detergent has been dispensed.
2. If dispenser lid is open, let the cycle complete.
3. If dispenser lid is closed, close door, press start/pause (►II) to pause, then press and hold 'P' for 3 seconds to select a new programme. Press start/pause (►II) to begin the new cycle.

At the End of a Programme

The dishwasher will beep. For safety, leave the door closed until ready to unload to prevent steam damage. Alternatively, open fully and wait for dishes to cool. Do not leave the door partially open.

Switching Off the Unit

Press the power button (U) to save energy. For long periods of non-use, disconnect from mains and water supply.

Unloading the Dishwasher

Allow dishes to cool before unloading. Unload lower basket first, then cutlery basket, then upper basket to prevent dripping.

Delay Start

1. Load dishes and close door.
2. Press power button (U).
3. Select programme.
4. Set delay start time using the (U) button.
5. Press start/pause (►II).

Half Load

1. Load dishes and close door.
2. Press power button (U).
3. Select programme.
4. Press the 1/2 button, then press start/pause (►II).

Child Lock

Press and ½ buttons simultaneously to enable/disable. The child lock indicator will light up/extinguish.