Manual for DP-940

Manual for DP-940

Brand: KENWOOD

Category: Audio

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 8:39 p.m.

Playing a CD

  1. Press the POWER key to ON.
  2. Open the disc tray, place a CD with the label side up, and close the tray.
  3. Playback starts from track No. 1.

Pausing and Stopping Playback

  • Press the Play/pause key to pause; press again to resume.
  • Press the Stop key to stop playback.

Listening to a Desired Track

  • Use Skip keys to start from the current or next track.
  • Use Numeric keys to select a specific track number.
  • Use Search keys to find a position within a track.

Programmed Play (PGM mode)

  1. Enter PGM mode.
  2. Program desired track numbers.
  3. Start playback.

Repeated Play

Select PGM mode or TRACK mode, press the REPEAT key to repeat playback of programmed tracks or the whole CD.

Editing

Allows for editing CD contents for tape recording using EDIT, AI EDIT, or MULTI EDIT modes.

Troubleshooting and error codes

Symptom Cause Remedy
No power is applied with the POWER switch ON. • Power plug is loosely connected.
• With the power plug connected to the switched AC outlet of an amplifier, the power of the amplifier is turned off.		 • Insert the power plug firmly to the AC outlet.
• Turn the amplifier's power ON.
Disc is loaded, player does not play. • Disc is loaded upside down.
• Disc is dirty.
• Disc is cracked.
• Condensation occurred on the optical lens unit.
• Disc is not loaded.
• Play mode is not entered (The play/pause indicator is not lit.)		 • Load the disc again with its label side up.
• Wipe off the dust on the surface of the disc referring to "Disc handling precautions".
• Replace the disc with a new one.
• Leave the player for about 1 hour so that the condensation is removed.
• Load a disc and press the PLAY/PAUSE key.
• Press the PLAY/PAUSE key.
No sound. • Disc is too dirty.
• Disc is cracked.
• The connection cords are inserted loosely.		 • Wipe off the dust on the disc surface referring to "Disc handling precautions".
• Replace the disc with a new one.
• Connect all connection cords firmly.
Music is interrupted. (Sound is skipped.) • Disc is too dirty.
• Disc is cracked.
• Oscillation is applied to this unit.		 • Wipe off the dust on the disc surface referring to "Disc handling precautions".
• Replace the disc with a new one.
• Try selecting a place where no strong vibrations occur by changing the installation place, etc.
Privacy Policy