Manual for XL-Z132BK/XL-Z232BK

Manual for XL-Z132BK/XL-Z232BK

Brand: JVC

Category: Audio System

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 9:16 p.m.

Warranty Information

This is a limited warranty for one year on parts and labor in the US, DC, and Puerto Rico.

  • Turning on the power: Press the POWER button. The unit turns on and the display activates. Press again to standby or disconnect the power cord for a full shutdown.
  • Loading a disc: Press OPEN/CLOSE to open the tray, place the disc with the label side up, then press OPEN/CLOSE to close.
  • Playing a disc: Press the PLAY (►) or PLAY/PAUSE (►/II) button.
  • Stopping playback: Press the STOP (■) button.
  • Skipping tracks: Use the◄◄ or ►►► buttons to move to the beginning or next track, respectively.
  • Searching: Press and hold the ◄◄ or ►►► SEARCH buttons for fast forward or backward playback.
  • Programmed playback: Use the PROGRAM button to select and play tracks in a desired order.
  • Random playback: Press the RANDOM button to play tracks in a random order.
  • Repeat playback: Use the REPEAT (ALL/1) button to repeat the whole disc or a single track.

Troubleshooting and error codes

Symptom Possible cause Remedy
The unit is not operative. Power plug is disconnected from the AC outlet. Connect the plug to an AC outlet.
The AC power cord plug is disconnected from the AC power cord inlet of this unit. Connect the plug to an AC power cord inlet.
The remote control unit does not function. (XL-Z232BK only) Disc is not loaded. Load a disc in the disc tray.
Batteries are exhausted. Replace both batteries.
There is an obstacle between remote control unit and the remote sensor of the main unit. Remove the obstacle.
Direct sunlight shines on the remote sensor of the main unit. Shade the unit from the direct sunlight.
Playback is not possible. Disc is inserted upside down. Load a disc with its label-side up in the disc tray.
Disc is not loaded in the correct position. Load the disc according to the groove of the disc tray.
Moisture is condensed inside the unit. Leave the unit turned on until the moisture evaporates.
The reproduced sound includes noise. Disc is dirty. Wipe off the disc surface with a soft cloth.
Disc is warped. Replace the disc with a new one.
Disc is scratched. Replace the disc with a new one.
Privacy Policy