Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Manual for RV-B99BK
Uploaded: Nov. 21, 2025, 6:33 p.m.
Warranty Information
Refer to the enclosed warranty card for details.
Basic Operation
Power On/Off: Press the /I button. The unit enters standby mode when the power cord is connected to AC power.
CD Playback: Press the CD/ button, then press /II to play. Use numbered buttons and +/-10 to select tracks or program play.
Tuner Operation: Press the TUNER BAND/FM MODE button. Use tuning buttons or preset buttons to select stations.
Tape Playback: Press the TAPE button, then press /II to play. Use REW, FF, and STOP buttons for tape control.
Volume Control: Use the VOLUME and SUPER WOOFER VOLUME controls on the main unit or remote to adjust sound levels.
Sound Modes: Press the SOUND button to cycle through BEAT, POP, CLEAR, and FLAT modes.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Power cannot be turned on. | Power cord unplugged. | Ensure power cord is plugged in. |
| No sound from speakers. | Headphones connected. | Disconnect headphones. |
| Clock time blinking. | Power failure or cord unplugged without backup batteries. | Reset clock time. |
| CD player does not play. | CD upside down, dirty, or lens dirty. | Check CD, clean lens. |
| CD skips or mistracks. | CD dirty, scratched, or condensation on lens. | Clean CD, check for damage, clean lens. |
| Tape playback sound low. | Head dirty. | Clean the head. |
| ONE TOUCH REC not functioning. | Cassette safety tab broken. | Use a cassette with intact safety tabs. |