Brand: HUFFY
Category: Ride On Toy
Document Type:
Language: EN
Manual for VeScooter m0760 - Troubleshooting and error codes + PDF Download
Uploaded: March 30, 2025, 4:25 p.m.
Manual Publish Date: 2021-03-23
Warranty Summary
The limited warranty covers defects in workmanship and materials for specific periods, ranging from 90 days to 6 months depending on the component, for recreational use only.
To Operate:
- Press Foot Switch (A) to move Forward.
- To STOP, release Foot Switch (A). Motor friction will gradually stop vehicle.
- Music/Sound buttons (B) are available.
Charging:
- Locate Charging Port (A).
- Plug Charger plug into unit Charging Port.
- Plug Charger into Wall outlet (B).
- When battery is fully charged, unplug charger from the wall outlet and disconnect from charger port.
- Initial charge: 8-12 hours (max 20 hours).
- Subsequent charges: 8-12 hours (max 20 hours).
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not run when switch is activated | Battery wires not connected or are loose | Connect battery wires according to assembly instructions, Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor call Customer Service. |
| Battery low on power | Recharge battery (see Battery: Recharge interval and time) | |
| Battery Charger still plugged in | Unplug Battery Charger from unit and wall | |
| Thermal fuse has tripped | Let Fuse reset | |
| Battery is dead | Replace battery (see Battery: Replacement and Disposal) | |
| Electrical system or motor is damaged | Call Customer Service. | |
| Vehicle does not run very long or runs sluggishly | Battery is undercharged. | Check that the battery connectors are firmly plugged into each other when recharging (see Battery: Recharge interval and Time) |
| Battery is old and cannot be fully charged | Replace battery (see Battery: Replacement and Disposal) | |
| Vehicle is overloaded | Reduce weight on vehicle (see user requirements and Safety Warnings) | |
| Vehicle is being used in harsh conditions | Avoid using vehicle in harsh conditions (see User Requirements and Safety Warnings) | |
| Vehicle makes loud noise when in use | Chain is dry (on chain drive models) | Lubricate chain with light oil. |
| Loud grinding or clicking noises coming from motor or gear box | Motor or gears are damaged | Call Customer Service. |
| Drive Wheel is partially engaged | Check drive wheel - to motor engagement. | |
| Battery will not recharge | Battery connector or adapter connector is loose | Check that the battery connectors are firmly plugged into each other. |
| Charger is not working | Check that the battery charger is plugged into a working wall outlet. | |
| Battery is dead | Replace battery. | |
| Charger feels warm when recharging | This is normal and not a cause for concern | If excessively hot, unplug and replace. |