Brand: HUAWEI
Category: Other
Document Type: Quick Start Guide
Language: EN
Quick Start Guide for IFP-UG86E
Uploaded: Nov. 21, 2025, 6:24 p.m.
Warranty Information
This document contains statements regarding product compliance and disposal, but no specific warranty period is mentioned.
Powering On the Device
When transporting a device from a low-temperature area to a high-temperature area, do not operate the device for a period of time until the dew is fully distributed, and then start the device. After the power supply is connected, set the power switch of the display to ON.
Configuring the Device
Upon first power-on of the device, follow instructions on the touchscreen UI to configure the device. By default, no password is required for accessing the Advanced screen. After the endpoint is started for the first time or restored to factory settings, choose Settings > Advanced > Admin Password in the lower right corner of the home page on the touchscreen to configure a password.
Connecting to More Devices
The large screen supports the connection of multiple types of interfaces to other devices. For details, see the following figure.
- Connecting to the network: Use a LAN cable to connect to the network port.
- Connecting to a presentation source: Use an HDMI cable to connect a PC.
- Connecting to a USB device: Connect a USB flash drive.