Brand: HP
Category: Networking
Document Type: Manual
Language: EN
Manual for 1920 Gigabit Ethernet Switch Series
Uploaded: Nov. 21, 2025, 7:43 p.m.
Manual Publish Date: 2014-06-20
Warranty Information
No warranty information is present in the provided document pages.
The HP 1920 Switch Series can be configured through the command line interface (CLI), Web interface, and SNMP/MIB. These configuration methods are suitable for different application scenarios.
The Web interface supports all 1920 Switch Series configurations.
The CLI provides configuration commands to facilitate your operation. To perform other configurations not supported by the CLI, use the Web interface.
The Web interface supports all 1920 Switch Series configurations.
The CLI provides configuration commands to facilitate your operation. To perform other configurations not supported by the CLI, use the Web interface.
Troubleshooting and error codes
| Troubleshooting Area | Possible Cause | Solution |
|---|---|---|
| Login Failure | Incorrect username or password. | Verify the username and password. |
| Web Interface Not Accessible | Incorrect IP address or network connectivity issue. | Verify the IP address, check network cables, and ensure the PC is on the same network segment. |
| Configuration Not Saved | Forgot to save the configuration. | Manually save the configuration before logging out. |
| Slow Performance | High CPU or memory usage. | Check system resource state in the Web interface. Restart or investigate processes consuming resources. |