Brand: Honeywell
Category: Scanner
Document Type: Manual
Language: EN
Manual for VX6
Uploaded: Nov. 21, 2025, 8:30 p.m.
Warranty Information
The limited warranty for the VX6 and its accessories is 1 year.
The VX6 Vehicle Mount Computer is a rugged, PC-based device running Windows CE that supports wireless data communication. It features a 400MHz Intel PXA255 CPU, 128MB RAM, and various I/O components including serial ports, PCMCIA slots, and an SD card slot. The device supports 802.11b/g and Bluetooth for wireless connectivity. Power is supplied via vehicle DC input (12-80V DC). The VX6 includes a QWERTY keyboard and a touch screen for input. It offers multiple power modes: On, User Idle, and Off. The device supports various software applications and can be configured for network settings, security, and custom keymaps. It also supports external barcode readers and can be managed remotely.
Troubleshooting and error codes
| Message | Explanation and/or corrective action | Level |
|---|---|---|
| Switching to admin-backdoor | The system is currently in user mode and is now switching to admin mode. The switch occurred because of the backdoor key presses were entered by the administrator. | LOG_PROCESSING |
| Switching to admin hotkey press | The system is currently in user mode and is now switching to admin mode. The switch occurred because of a hotkey press by the administrator. | LOG_PROCESSING |
| Switching to admin kbdhook.dll not found | The keyboard hook load failed, so AppLock switches to admin mode. If a password is specified, the password prompt is displayed and remains until a valid password is entered. | LOG_PROCESSING |
| Switching to admin keyboard hook initialization failure | If the keyboard hook initialization fails, AppLock switches to admin mode. If a password is specified, the password prompt is displayed and remains until a valid password is entered. | LOG_PROCESSING |
| Switching to admin registry read failure | See the explanation of the "Registry read failure" above. AppLock is switching into Admin mode. If a password has been configured, the prompt will be displayed and will not be dismissed until a valid password is entered. | LOG_PROCESSING |
| Switching to TaskbarScreenMode | In administration mode, the taskbar is visible and enabled. | LOG_EX |
| Switching to user mode | The registry was successfully read and AppLock is starting the process to switch to user mode. | LOG_PROCESSING |
| Switching to user-hotkey press | The system is currently in admin mode and is now switching to user mode. The switch occurred because of a hotkey press by the administrator. | LOG_PROCESSING |
| Taskbar hook failure | AppLock is unable to control the taskbar to prevent the locked application from re enabling it. | LOG_ERROR |
| Taskbar hook OK | AppLock successfully installed control of the taskbar. | LOG_EX |
| Timeout looking for app window | After the application is launched, AppLock must wait until the application has initialized itself before proceeding. The application did not start successfully and AppLock has timed out. | LOG_ERROR |
| ToUser after admin, not at boot | The user mode switch is attempted when the device boots and after the administrator presses the hotkey. The mode switch is being attempted after a hotkey press. | LOG_EX |
| ToUser after admin-app still open | The switch to user mode is being made via a hotkey press and the administrator has left the application open and has not made any changes in the configuration. | LOG_EX |
| ToUser after admin-no app or cmd line change | If user mode is being entered via a hotkey press, the administrator may have left the configured application open. If so, AppLock does not launch the application again unless a new application or command line has been specified; otherwise, it just locks it. | LOG_EX |
| Unable to move desktop | The desktop is moved when switching into user mode. This prevents them from being visible if the application is exited and restarted by the timer. This error does not affect the screen mode switch; processing continues. | LOG_ERROR |
| Unable to move taskbar | The taskbar is moved when switching into user mode. This prevents them from being visible if the application is exited and restarted by the timer. This error does not affect the screen mode switch; processing continues. | LOG_ERROR |
| Unhook taskbar wndproc failure | AppLock could not remove its control of the taskbar. This error does not affect AppLock processing | LOG_ERROR |
| Unhook wndproc failure | AppLock could not remove the hook that allows monitoring of the application. | LOG_ERROR |
| Unhooking taskbar | In administration mode, the taskbar should return to normal operation, so AppLock’s control of the taskbar should be removed. | LOG_EX |