Brand: GRACO
Category: Car Seat
Document Type:
Language: EN
Manual for NAUTILUS - Troubleshooting and error codes + PDF Download
Uploaded: March 29, 2025, 7:46 p.m.
Manual Publish Date: 2013-03-13
Warranty Summary
For warranty information in the United States, contact Graco customer service at www.gracobaby.com or 1-800-345-4109.
Child Restraint with Built-in Harness:
- Loosen harness straps and open harness clip.
- Unbuckle harness straps.
- Check and adjust crotch strap position.
- Adjust harness straps to shoulder level.
- Secure the child restraint in the vehicle using vehicle lap or lap/shoulder belt or LATCH system.
- Place child in restraint and buckle harness.
- Fasten harness clip at chest level.
- Tighten harness straps to be snug.
- Remove built-in harness.
- Place booster seat in vehicle.
- Position child in booster seat.
- Secure child and booster seat using vehicle lap/shoulder belt, ensuring proper belt routing through shoulder belt guide and across child's shoulder and lap.
- Adjust head support for optimal shoulder belt positioning.
Troubleshooting and error codes
Troubleshooting Guide
| Problem | Solution |
|---|---|
| Buckle or harness adjuster sticks or will not remain tight | Check for foreign objects. Remove objects. If issue persists, contact Graco for replacement. |
| Harness straps are twisted | Ensure harness straps are flat and not twisted when securing child. |
| Child restraint is loose after installation | Repeat installation procedure, ensure proper tightening of vehicle belt or LATCH. If still loose, try a different seating location or consult vehicle manual. |