Manual for PD18-10/10D

1. **Constant-Voltage Operation:** - Set the desired voltage using the VOLTAGE knob. - Turn on the OUTPUT switch to apply the voltage. - A current limit can be set using the CURRENT knob. 2. **Constant-Current Operation:** - Set the desired current using the CURRENT knob. - Set a voltage limit using the VOLTAGE knob (acts as OVP). - Turn on the OUTPUT switch to apply the current. 3. **Checking Voltage and Current:** - Depress the V/I CHECK switch to view preset or output values. 4. **Overvoltage Protection (OVP):** - Set the OVP level using the OVP adjuster (12) while holding the OVP CHECK switch (11). 5. **Remote Sensing:** - Connect the remote sensing terminals (+S, -S) to the load to compensate for voltage drops. 6. **Series/Parallel Connection:** - Units can be connected in series for higher voltage or in parallel for higher current. 7. **Battery Charging/Discharging:** - The unit can charge or discharge batteries/capacitors in constant-current mode.