Brand: GE
Category: Other
Document Type: Manual
Language: EN
Manual for 29391
Uploaded: Nov. 21, 2025, 9:13 p.m.
Warranty Information
This appliance is guaranteed for one year against manufacturing defects.
The GE 29391 is a Call Waiting Caller ID Speakerphone. This manual covers installation and setup, including installing batteries, desktop, and wall mount options. It details Caller ID features such as reviewing call records, dialing back, and using the summary screen. The phone offers various settings for the Caller ID display, language, contrast, and dial mode. Basic telephone functions like receiving and placing calls, switching between speakerphone and handset, redialing, and putting calls on hold are explained. It also covers memory functions for storing frequently called numbers and troubleshooting common issues.
Troubleshooting and error codes
| ISSUE | SOLUTION |
|---|---|
| NO DIALING SIGNAL | Verify that the dialing mode in the programming menu is set to Tone. This setting may not be compatible with your local dialing service. |
| PHONE DOES NOT RING | Ensure the ring selector is not set to OFF. Avoid using too many telephones on the same line, as the total REN must not exceed the regional maximum. Check that the handset hook switch is fully engaged when the handset is on the base. |
| LOW VOICE VOLUME (CALLER AND CALLED) | Check if other phones are off-hook simultaneously. This is normal as volume decreases when multiple phones are in use. |
| TONE FLUCTUATION IN PULSE DIALING MODE | This is normal; current fluctuates when the phone is dialing. |
| NO DIALING SIGNAL | Verify the dialing mode in the programming menu. If set to Tone, it may not be compatible with your local dialing service. |
| NO DISPLAY | Replace batteries. Check battery installation. |
| NO INFORMATION DISPLAYED WHEN PHONE RINGS | Ensure you have subscribed to caller display service from your phone company. Wait until after the second ring before answering. |
| ERROR MESSAGE DISPLAYED | An ERROR message indicates that the device detected something other than valid caller information after the first ring. This may be due to line noise or an invalid message from the phone company. |
| PHONE DOES NOT DIAL | Check the dialing mode in the programming menu. If set to Tone, it might not be compatible with your local dialing service. |