Brand: Electrolux
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for ERN29600
Uploaded: Sept. 12, 2025, 4:25 a.m.
Warranty Information
Refer to the retailer for warranty information.
- Switching On/Off: Insert plug to turn on, turn Temperature regulator to "O" to switch off.
- Temperature Regulation: Turn regulator towards lower settings for minimum coldness, higher settings for maximum coldness. A medium setting is generally suitable.
- Daily Use: Avoid storing hot items, flammable liquids, and products directly against air outlets. Do not refreeze thawed food.
- Freezing Fresh Food: For faster freezing, turn regulator to higher settings.
- Storage of Frozen Food: Let appliance run for 2 hours on higher settings before storing. Remove drawers for large quantities. Adhere to load limits.
- Thawing: Thaw in the refrigerator or at room temperature. Small pieces can be cooked from frozen.
- Ice Cubes: Use provided trays and fill with water.
Troubleshooting and error codes
| Problem | Possible cause | Solution |
|---|---|---|
| The appliance does not operate. | The appliance is switched off. | Switch on the appliance. |
| The mains plug is not connected to the mains socket correctly. | Connect the mains plug to the mains socket correctly. | |
| The appliance has no power. There is no voltage in the mains socket. | Connect a different electrical appliance to the mains socket. Contact a qualified electrician. | |
| The lamp does not work. | The lamp is in stand-by. | Close and open the door. |
| The lamp is defective. | Refer to "Replacing the lamp". | |
| The compressor operates continually. | The temperature is not set correctly. | Set a higher temperature. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The door has been opened too frequently. | Do not keep the door open longer than necessary. | |
| The product temperature is too high. | Let the product temperature decrease to room temperature before storage. | |
| The room temperature is too high. | Decrease the room temperature. | |
| Water flows on the rear plate of the refrigerator. | During the automatic defrosting process, frost defrosts on the rear plate. | This is correct. |
| Water flows into the refrigerator. | The water outlet is clogged. | Clean the water outlet. |
| Products prevent that water flows into the water collector. | Make sure that products do not touch the rear plate. | |
| Water flows on the ground. | The melting water outlet does not flow in the evaporative tray above the compressor. | Attach the melting water outlet to the evaporative tray. |
| The temperature in the appliance is too low/high. | The temperature regulator is not set correctly. | Set a higher/lower temperature. |
| The temperature in the refrigerator is too high. | There is no cold air circulation in the appliance. | Make sure that there is cold air circulation in the appliance. |
| The temperature in the freezer is too high. | Products are too near to each other. | Store products so that there is cold air circulation. |
| There is too much frost. | Food is not wrapped correctly. | Wrap the food correctly. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The temperature regulator is not set correctly. | Set a higher temperature. |