Brand: Electrolux
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for ENN3153AOW
Uploaded: Nov. 21, 2025, 6:26 p.m.
Warranty Information
No warranty period is explicitly stated, but product registration is encouraged for better service.
Basic Operation:
To turn the appliance on, plug it in and press the ON/OFF switch if the display is not illuminated. The control panel will show status indicators. You can set the desired temperature for both the fridge and freezer compartments using the respective temperature regulators. Various functions like Action Freeze, Shopping, and FreeStore can be activated via the Function button to optimize food preservation and chilling. The manual also details how to switch the appliance off and manage individual compartments.
Troubleshooting and error codes
| Problem | Possible cause | Solution |
|---|---|---|
| The appliance does not operate. The lamp does not operate. | The appliance is switched off. | Switch on the appliance. |
| The mains plug is not connected to the mains socket correctly. | Connect the mains plug to the mains socket correctly. | |
| The appliance has no power. There is no voltage in the mains socket. | Connect a different electrical appliance to the mains socket. Contact a qualified electrician. | |
| The buzzer sounds. | The temperature in the freezer is too high. | Refer to "Excessive Temperature Alarm". |
| The lamp does not work. | The lamp is in stand-by. | Close and open the door. |
| The lamp is defective. | Refer to "Replacing the lamp". | |
| The compressor operates continually. | The temperature is not set correctly. | Set a higher temperature. |
| The door is not closed correctly. | Refer to "Closing the door". | |
| The door has been opened too frequently. | Do not keep the door open longer than necessary. | |
| The product temperature is too high. | Let the product temperature decrease to room temperature before storage. | |
| Water flows on the rear plate of the refrigerator. | The room temperature is too high. | Decrease the room temperature. |
| During the automatic defrosting process, frost defrosts on the rear plate. | This is correct. | |
| Water flows into the refrigerator. | The water outlet is clogged. | Clean the water outlet. |
| Water flows on the ground. | Products prevent that water flows into the water collector. | Make sure that products do not touch the rear plate. |
| The melting water outlet does not flow in the evaporative tray above the compressor. | Attach the melting water outlet to the evaporative tray. | |
| The temperature in the appliance is too low. | The temperature regulator is not set correctly. | Set a higher temperature. |
| The temperature in the appliance is too high. | The temperature regulator is not set correctly. | Set a lower temperature. |
| The temperature in the refrigerator is too high. | Many products are stored at the same time. There is no cold air circulation in the appliance. | Store less products at the same time. Make sure that there is cold air circulation in the appliance. |
| The temperature in the freezer is too high. | Products are too near to each other. | Store products so that there is cold air circulation. |
| There is too much frost. | Food is not wrapped correctly. The door is not closed correctly. | Wrap the food correctly. Refer to "Closing the door". |