Manual for 1130n

Manual for 1130n

Brand: Dell

Category: Printer

Document Type: Manual

Language: EN

Uploaded: Sept. 12, 2025, 4:16 a.m.

Manual Publish Date: 2010-01-01

Warranty Information

Dell disclaims any proprietary interest in trademarks and trade names other than its own.

Important Safety Symbols

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of danger.

  • Warning: Hazards or unsafe practices that may result in severe personal injury or death.
  • Caution: Hazards or unsafe practices that may result in minor personal injury or property damage.
  • Do not attempt.
  • Do not disassemble.
  • Do not touch.
  • Unplug the power cord from the wall socket.
  • Make sure the machine is grounded to prevent electric shock.
  • Call the service center for help.
  • Follow directions explicitly.

Operating Environment

Warning:

  • Do not use if the power cord is damaged or if the electrical outlet is not grounded. This could result in electric shock or fire.
  • Do not place anything on top of the machine (water, small metal or heavy objects, candles, lit cigarettes, etc.). This could result in electric shock or fire.
  • If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. This could result in electric shock or fire.
  • Do not bend, or place heavy objects on the power cord. Stepping on or allowing the power cord to be crushed by a heavy object could result in electric shock or fire.
  • Do not remove the plug by pulling on the cord; do not handle the plug with wet hands. This could result in electric shock or fire.

Caution:

  • During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet.
  • If the plug does not easily enter the electrical outlet, do not attempt to force it in.
  • Do not forcefully pull the paper out during printing. It can cause damage to the machine.
  • Be careful not to put your hand between the machine and paper tray. You may get injured.
  • Do not block or push objects into the ventilation opening. This could result in elevated component temperatures which can cause damage or fire.
  • Use care to avoid paper cuts when replacing paper or removing jammed paper. You may get hurt.

Installation / Moving

Warning:

  • Do not place the machine in an area with dust, humidity or water leaks. This could result in electric shock or fire.

Caution:

  • When moving the machine, turn the power off and disconnect all cords; then lift the machine with at least two people. The machine could fall, causing human injury or machine damage.
  • Do not place the machine on an unstable surface.
  • Do not put a cover over the machine or place it in an airtight location, such as a closet. If the machine is not well-ventilated, this could result in fire.
  • Make sure you plug the power cord into a grounded electrical outlet. Otherwise, this could result in electric shock or fire.

Troubleshooting and error codes

LED Status Description
Jam (&) Orange On A paper jam has occurred. (See Clearing paper jams.)
Online/Error (/A) Off-line The machine is off-line.
Green On The machine is in power saver mode.
Green On The machine is on-line and can receive data from the computer.
Online/Error (/A) Blinking When the LED blinks slowly, the machine is receiving data from the computer.
When the LED blinks rapidly, the machine is printing data.
Red On The cover is open. Close the cover.
There is no paper in the tray. Load paper in the tray.
The machine has stopped due to a major error.
Your system has some problems. If this problem occurs, contact your service representative.
On The toner cartridge has almost reached its estimated cartridge life[a]. It is recommended to replace the toner cartridge. (See Replacing the toner cartridge.)
Online/Error (/A) Blinking A minor error has occurred and the machine is waiting for the error to be cleared. When the problem is cleared, the machine resumes.
Blinking Toner is low. Replace the cartridge. The estimated cartridge life[a] of toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner. (See Redistributing toner.)
Privacy Policy